Cast-in-Place Concrete Connections for Precast Deck Systems (2011) / Chapter Skim
Currently Skimming:
Pages 701-709
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 701... ...
F-i Appendix F Concept 2 Large-Scale Laboratory Bridge Instrumentation Designation, Nominal, and Measured Locations
|
From page 702... ...
F-1 F.1 Concept 2 Laboratory Specimen Instrumentation Designation The instrumentation for the concept 2 laboratory specimen was labeled as described in this section. An example designation is given in Figure F.1.
|
From page 703... ...
F-2 5. The fifth character indicated where the gage was located in the depth of the cross section.
|
From page 704... ...
F-3 Figure F.1: Concept 2 Laboratory specimen strain gage designation example F.2 Measured Locations of Concept 2 Laboratory Specimen Instrumentation All of the instrumentation in the laboratory specimen was measured to the nearest ¼ in. The sign convention of the gage ordinates is shown in Figure F.2.
|
From page 705... ...
F-4 Figure F.2: Sign convention for the strain gage location measurements in the Concept 1 Laboratory Bridge
|
From page 706... ...
F-5 Table F.1: Global gage locations for instruments in the Concept 2 laboratory bridge specimen (in.) X from CL pier (E+)
|
From page 707... ...
F-6 X from CL pier (E+) ; Y from joint (N+)
|
From page 708... ...
F-7 X from CL pier (E+) ; Y from joint (N+)
|
From page 709... ...
F-8 X from CL pier (E+) ; Y from joint (N+)
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.