Cast-in-Place Concrete Connections for Precast Deck Systems (2011) / Chapter Skim
Currently Skimming:
Pages 734-743
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 734... ...
I-i Appendix I Subassemblage Instrumentation Designation, Nominal, and Measured Locations
|
From page 735... ...
I-1 I.1 Subassemblage Specimen Instrumentation Designation The instrumentation for the subassemblage specimens was labeled as described in this section. An example designation is given in Figure I.1.
|
From page 736... ...
I-2 Figure I.1: Subassemblage specimen strain gage designation example I.2 Measured Locations of Subassemblage Specimen Instrumentation All of the instrumentation in the subassemblage specimens was measured to the nearest ¼ in. The sign convention of the gage ordinates is shown in Figure I.2.
|
From page 737... ...
I-3 Table I.1: Nominal and measured instrumentation locations in the subassemblage specimens X from edge (N+) ; Y from joint (W+)
|
From page 738... ...
I-4 X from edge (N+) ; Y from joint (W+)
|
From page 739... ...
I-5 X from edge (N+) ; Y from joint (W+)
|
From page 740... ...
I-6 X from edge (N+) ; Y from joint (W+)
|
From page 741... ...
I-7 X from edge (N+) ; Y from joint (W+)
|
From page 742... ...
I-8 X from edge (N+) ; Y from joint (W+)
|
From page 743... ...
I-9 X from edge (N+) ; Y from joint (W+)
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.