Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
91 Abelleira, A., N. S. Berke, and D. G. Pickering (1998). âCorrosion Ac- tivity of Steel in Cementitious Controlled Low-Strength Materials vs. That in Soilâ in The Design and Application of Controlled Low- Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 124â136. Adaska, W. S., and W. C. Krell (1992). âBibliography on Controlled Low Strength Materials.â Concrete International, Vol. 14, No. 10, pp. 42â43. Adaska, W. S. (1997). âControlled Low Strength Materials.â Concrete International, Vol. 19, No. 4, pp. 41â43. American Concrete Institute Committee 229 (1999). âACI 229R-99 Report: Controlled Low Strength Materials (CLSM).â ACI Com- mittee 229 Report, 15 p. American Nuclear Society (1986). ANS 16.1, Measurement of the Leachability of Solidified Low-Level Radioactive Wastes by a Short- Term Test Procedure. Bernard, R. D., and R. S. Tansley (1981). âLaboratory Testing Program for Development of a Lean Mix Backfill Specification.â PB83- 122952, Department of Housing and Urban Development, Wash- ington, DC, 31 p. Bhat, S. T., and C. W. Lovell (1996). âUse of Coal Combustion Residues and Foundry Sands in Flowable Fill.â Joint Highway Research Proj- ect, School of Civil Engineering, Purdue University, 222 p. Bowles, J. E. (1984). Physical and Geotechnical Properties of Soils, Second Edition. McGraw-Hill, 578 p. Brewer, W. E. (1991). Controlled Low Strength MaterialâControlled Density Fill (CLSM-CDF) Research-Corrosion Testing. The Cincin- nati Gas & Electric Company, Cincinnati, OH. Brewer, W. E. (1992). âThe Design and Construction of Small Span Bridges and Culvert Using Controlled Low Strength Material (CLSM).â FHWA/OH-93/014, Ohio Department of Transporta- tion, Columbus, OH, 129 p. Broomfield, J. P. (1997). Corrosion of Steel in Concrete. E & FN Spon., London and New York, p. 5â6. Burns, F. (1990). Flowable Fly Ash Backfill for Buried Pipelines. M.S. Thesis, University of North Carolina at Charlotte, 128 p. Buss, W. E. (1989). âIowa Flowable Mortar Saves Bridges and Culverts.â Transportation Research Record 1234, TRB, National Research Coun- cil, Washington, DC, pp. 30â34. Cady, P., and E. Gannon (1992). âCondition Evaluation of Concrete Bridges Relative to Reinforcement Corrosionâ in Report No. SHRP- S/FR-92-110 Vol. 8: Procedure Manual. Cao, L. B., B. Wortley, and V. Sirivivatnanon (1994). âCorrosion Be- haviours of Steel Embedded in Fly Ash Blended Cementsâ in Dura- bility of Concrete, Third International Conference, ACI, Nice, France. Clem, D. A., W. H. Hook, and J. Goldbaum (1995). âFlowable Fill Makes Bridge Replacement Economical.â Aberdeenâs Concrete Journal. Crouch, L. K., R. Gamble, J. F. Brogdon, and C. J. Tucker (1998). âUse of High-Fines Limestone Screenings as Aggregate for Controlled Low-Strength Material (CLSM)â in The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 45â59. Dolen, T. P., and A. A. Benavidez (1998). âProperties of Low-Strength Concrete for Meeks Cabin Dam Modification Project, Wyomingâ in The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 213â230. Du, L., K. J. Folliard, and D. Trejo (2002). âEffects of Constituent Ma- terials and Quantities on Water Demand and Compressive Strength of Controlled Low Strength Material.â ASCE Journal of Civil Engi- neering Materials, Vol. 14, No. 6, pp. 485â495. Du, L., K. J. Folliard, and D. Trejo (2004). âA New Unbonded Capping Practice for Evaluating the Compressive Strength of Controlled Low-Strength Material Cylinders.â Cement, Concrete & Aggregates, Vol. 26, No. 1, pp. 1â8. Edgar, T. V. (1989). âIn-Service Corrosion of Galvanized Culvert Pipeâ in Effects of Soil Characteristics on Corrosion, V. Chaker and J. D. Palmer (Eds.), American Society for Testing and Materials, Philadelphia, PA, pp. 133â143. Federal Highway Administration (1997). âUser Guidelines for Waste and By-Product Materials in Pavement Construction,â Report No. FHWA-RD-97-148. Folliard, K. J., D. Trejo, L. Du, and S. A. Sabol (1999). Controlled Low- Strength Material for Backfill, Utility Bedding, Void Fill, and Bridge Approaches, NCHRP 24-12 Phase I Interim Report, Delaware Trans- portation Institute, University of Delaware, Newark. Folliard, K. J., D. Trejo, L. Du, and S. A. Sabol (2001). Controlled Low- Strength Material for Backfill, Utility Bedding, Void Fill, and Bridge Approaches in NCHRP 24-12 (01) Interim Report, The University of Texas at Austin. Fox, T. A. (1989). âUse of Coarse Aggregate in Controlled Low Strength Materials.â Transportation Research Record 1234, TRB, National Research Council, Washington, DC, pp. 35â38. References
92 Gandham, S., R. K. Seals, and P. T. Foxworthy (1996). âPhosphogypsum as a Component of Flowable Fill.â Transportation Research Record 1546, TRB, National Research Council, Washington, DC, pp. 79â87. Gardner, M. R. (1998). âDeveloping CLSM to Meet Industry and Con- struction Needsâ in The Design and Application of Controlled Low- Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 194â199. Gray, D. D., T. P. Reddy, D. C. Black, and P. F. Ziemkiemcz (1998). âFilling Abandoned Mines With Fluidized Bed Combustion Ash Groutâ in The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 180â193. Green, B. H., K. Staheli, D. Bennett, and D. Walley (1998). âFly-Ash-Based CLSM Used for Critical Microtunneling Applicationsâ in The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American So- ciety for Testing and Materials (ASTM), West Conshohocken, PA, pp. 151â164. Gress, D. (1996). âThe Effect of Freeze-Thaw and Frost Heaving on Flowable Fill.â UNH Civil Engineering #1096-1 for New Hampshire Department of Transportation, University of New Hampshire, 56 p. Hook, W., and D. A. Clem (1998). âInnovative Uses of CLSM in Col- oradoâ in The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 137â150. Hoopes, R. J. (1998). âEngineering Properties of Air-Modified CLSMâ in The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 87â101. Janardhanam, R., F. Burns, and R. D. Peindl (1992). âMix Design for Flowable Fly-Ash Backfill Material.â Journal of Materials in Civil Engineering, Vol. 4, No. 3, pp. 252â263. Karim, A. K., R. Salgado, and C. W. Lovell (1996). âCompaction of Fly and Bottom Ash Mixtures.â 51st Purdue Industrial Waste Confer- ence Proceedings. Katz, A., K. Kovler, and I. Schamban (2002). âEarly-Age Shrinkage and Cracking of Controlled Low-Strength Materials (CLSM).â Early Age Cracking in Cementitious Systems, RILEM Proceedings, PRO 23, pp. 373â381. Kennedy, D. O., and C. L. Linne (1987). âEnvironmental and Econom- ical Aspects of Sand Reclamation System.â EPRI, Vol. 2, Palo Alto, California, pp. 217â228. Kozhushner, G., R. Brander, and B. Ng. (2001). âUse of Pipe Recovery Data and the Hydroscope âNDTâ Inspection Tool For Condition Assessment of Buried Water Mainsâ in AWWA Infrastructure Con- ference. American Water Works Association. Krell, W. C. (1989). âFlowable Fly Ash.â Transportation Research Record 1234, TRB, National Research Council, Washington, DC, pp. 8â12. Landwermeyer, J. S., and E. K. Rice (1997). âComparing Quick Set and Regular CLSM.â Concrete International, Vol. 19, No. 5, pp. 34â39. Larsen, R. L. (1988). âUse of Controlled Low Strength Materials in Iowa.â Concrete International, Vol. 10, No. 7, pp. 22â23. Larsen, R. L. (1993). âSound Uses of CLSMâs in the Environment.â Concrete International, Vol. 15, No. 7, pp. 26â29. McLaren, R. J., and N. J. Balsamo (1986). Fly Ash Design Manual for Road and Site Applications: Volume 2, Slurried Placement. Electric Power Research Institute. Mullarky, J. I. (1998). âLong Term Strength Gain of CLSMâ in The De- sign and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). Ameri- can Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 102â107. Naik, T. R., R. N. Kraus, R. F. Sturzl, and B. W. Ramme (1998). âDe- sign and Testing CLSM Using Clean Coal Ashâ in The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 27â42. Nantung, T. E. (1993). Design Criteria for Controlled Low Strength Materials. Ph.D. Dissertation, Purdue University, 345 p. Nazarian, S., M. Baker, and K. Crain (1993). âDeveloping and Testing of a Seismic Pavement Analyzer,â SHRP-H-375, Strategic Highway Research Program. Neville, A. M. (1996). Properties of Concrete, Fourth Edition, John Wiley & Sons, pp. 322, 600. Ohlheiser, T. R. (1998). âUtilization of Recycled Glass as Aggregate in CLSMâ in The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 60â64. Palmer, J. D. (1989). âEnvironmental Characteristics Controlling the Soil Corrosion of Ferrous Pipingâ in Effects of Soil Characteristics on Corrosion, V. Chaker and J. D. Palmer (Eds.), American Society for Testing and Materials, Philadelphia, PA, pp. 5â17. PCA (1992). Soil-Cement Laboratory Handbook. Portland Cement Asso- ciation, Skokie, IL. Pierce, C. E., H. Tripathi, and T. W. Brown, (2003). âCement Kiln Dust in Controlled Low-Strength Materials.â ACI Materials Journal, Vol. 100, No. 6, pp. 455â462. RSMeans (1995). Means Building Construction Cost Data, Kingston, MA. Sauter, H. J., and L. K. Crouch (2000). âAn Improved Capping Tech- nique for Excavatable Controlled Low Strength Material Com- pressive Strength Cylinders.â Journal of Testing and Evaluation, Vol. 28, No. 3, pp. 143â148. Smith, A. (1991). âControlled Low-Strength Material.â Aberdeenâs Con- crete Construction, Vol. 36, No. 5, pp. 389â398. Snethen, D. R., and J. M. Benson (1998). âConstruction of CLSM Ap- proach Embankment to Minimize the Bump at the End of the Bridgeâ in The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch (Eds.). American Society for Testing and Materials (ASTM), West Conshohocken, PA, pp. 165â179. Spickelmire, B. (2002). âCorrosion Considerations for Ductile Iron Pipe.â Journal of Materials Engineering and Performance, 11 (July), p. 16â23. Sullivan, R. W. (1997). âBoston Harbor Tunnel Project Utilizes CLSM.â Concrete International, Vol. 19, No. 5, pp. 40â43. Tikalsky, P. J., E. Smith, and R. W. Regan (1998). âProportioning Spent Casting Sand in Controlled Low-Strength Materials.â ACI Materi- als Journal, Vol. 95, No. 6, pp. 740â746. U.S. Army Corps of Engineers (USACE) (1986). âLaboratory Soils Test- ing,â Engineer Manual 1110-2-1906, Washington, DC. U.S. Environmental Protection Agency (EPA) (1998). âBack Document for Proposed CPG III and Draft RMAN III,â EPA Report EPA530- R-98-003, Washington, D.C., 31 p. Whitman, G. W., Russell, R. P., and Altieri, V. J. (1924) âEffect of Hydrogen-Ion Concentration on the Submerged Corrosion of Steel.â Industrial and Engineering Chemistry, Vol. 16, No. 7 pp. 665â670.