Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
P-1 A P P E N D I X P AASHTO Material Specification
P-2 Standard Specification for Adhesive Anchors in Concrete AASHTO Designation: M XXXX-XX Prior to possible addition of SvTTF: Refer to ACI 355.4-11 for material specifications of adhesive anchors in concrete. With addition of SvTTF: Refer to ACI 355.4-11 for material specifications of adhesive anchors in concrete. Ψsus for use in AASHTO 2010 LRFD Bridge Design Specifications is determined from the Stress versus Time to Failure curve generated in AASHTO TP 84-10 evaluated at 876,000 hours (100 years). The percent stress level at 876,000 hours (100 years) on the Stress versus Time to Failure curve generated in AASHTO TP 84-10 must be greater than 50%. If not, the product is not acceptable for sustained load applications.
