National Academies Press: OpenBook

Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes (2019)

Chapter: 4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications

« Previous: 3 Alternate PublicPrivate Partnership Options
Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×

4

DoD Long-Term Manufacturing Institutes’ Strategy: Business Model Options and Implications

The business model options and implications that follow were developed by the study committee to span the range of alternative strategies for the Department of Defense (DoD) to consider in developing its long-term engagement with existing and potential future institutes. These options and implications were developed in closed session during the 2.5 days immediately following the study workshop while the inputs from all relevant sources were fresh in the committee’s thoughts.

The committee observed two distinct DoD modes of engagement with the institutes: (1) as coinvestor with industry in creating an ecosystem that will lead to dual-use U.S. supply chains in an emerging technology sector and (2) as a customer for DoD projects that tap capabilities in these sectors to meet defense needs. The first engagement mode, also referred to as DoD core funding, has been dominant to date. However, from the outset DoD core funding was planned to ramp down after 5-7 years.

With these two modes of engagement in mind, the committee developed the following five business model options for evaluation:

  • Option A: Current model with planned reduction in DoD support for core activities.
  • Option B: Current model with improvements to processes, offerings, and value-based core funding.
  • Option C: Transition to DoD customer model.
  • Option D: Transfer core responsibilities to the National Program Office (NPO) at the National Institute of Standards and Technology (NIST).
Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×
  • Option E: No core funding of institutes beyond initial investment.

OPTION A: CURRENT MODEL WITH PLANNED REDUCTION IN DOD SUPPORT FOR CORE ACTIVITIES

The current model was used to establish and operate the DoD institutes as public–private partnerships, with an emphasis on core activities (including funds for unencumbered industry-driven institute research and development [R&D] projects) for the first 5-7 years. Core funding is provided by the Office of the Secretary of Defense (OSD) Manufacturing Technology (ManTech) program office, each institute’s membership dues, state funding, and in-kind cost share from members. As shown in Appendix B, 14 of the 20 generic institute offerings currently use non-project core funding (although some could transition to funding as discrete projects).

The OSD ManTech budget1 for the eight institutes is projected to decline from $92 million in fiscal year (FY) 2019 to $37 million by FY2023. Although DoD adjusts budgets annually, this expected funding constraint would necessitate a reduction in core activities supported by OSD, with available funding going to the highest-priority core offerings as determined by DoD. The current model also assumes that unencumbered joint public–private partnership funding for industry-driven R&D projects as part of core will likely come to an end due to budget constraints.

Executing Option A is based on renewed or extended cooperative agreements or technology investment agreements with each institute as their current agreements expire. It anticipates that OSD oversight of the DoD institutes will continue to reside in the ManTech office under the Office of the Undersecretary of Defense for Research and Engineering (OUSD(R&E)). It also assumes that contracting and government program management via Contracting Officers’ Technical Representatives would continue to be provided by the current Army, Air Force, and Navy contracting offices.

Under Option A, institutes will need to find other sources of funding to maintain core activities and cover overhead and administrative expenses. Long-term funding for customer-defined project offerings could come from DoD, other federal stakeholders, industry, and foreign sources, but few or none are expected to provide core funding beyond their current membership dues. Financial anorexia will slowly make it more difficult for institutes to decline alluring international offers of funding. Foreign interest in the DoD institutes exists now and will steadily increase as they mature their respective technologies.

A summary of the implications for DoD goals is provided in Table 4.1.

___________________

1 Julie Locker, JDMTP Chair, 2018 Defense Manufacturing Conference, presentation on December 3, 2018.

Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×

TABLE 4.1 Impact of Option A: Current Model with Planned Reduction in DoD Support for Core Activities

DoD Goal Implications
  1. Impactful R&D
  • Both core activities and industrydriven core projects in TRL/MRL 4 to 7 will be difficult to fund and narrow in impact.
  • Impact on the U.S. industrial base may be adversely affected if institutes are driven to accept foreign funds.
  1. Viable business plans
  • With reduced core funding, institutes will focus on revenuegenerating offerings and become less missiondriven.
  • Unfunded core offerings that do not generate revenue will be cut back or dropped.
  1. Maximize value delivery
  • Reduced DoD support of core activities will reduce influence on the ecosystem and its dual use value to DoD.
  • If industry does not make up the difference in funding, important ecosystems elements will lag.
  1. Stakeholder understanding
  • Retains a role for DoD to collaborate with all stakeholders on core activities but reduces DoD input to industryled R&D projects if they no longer fit within funding constraints.
  1. Capable workforce
  • Assumes that DoD will continue to give priority to coinvestment in broad EWD programs as part of the reduced core funding.
  • Increases dependence on customer funded projects to do targeted EWD projects, which have been scarce to date.

NOTE: DoD, Department of Defense; EWD, education and workforce development; MRL, manufacturing readiness level; R&D, research and development; TRL, technology readiness level.

OPTION B: CURRENT MODEL WITH IMPROVEMENTS TO PROCESSES, OFFERINGS, AND VALUE-BASED CORE FUNDING

This option is structured to build on Option A, applying the potential improvements obtained as inputs from the stakeholder groups to the maximum extent possible within budget constraints. Option B assumes that DoD will formally review the performance of each institute as part of the decision to extend or renew agreements and that it will fund continued support of core activities at a level commensurate with the value to DoD (which may or may not be higher than Option A depending on results of the reviews).

Appendixes C and D contain summaries of the potential improvements, listing key activities that DoD and the institutes would consider “keep doing,” “start doing,” and “stop doing.” Many of these improvements will require no or low additional cost to implement, yet will improve outcomes and also save time and money. Option B further assumes that DoD will work with the institutes to prioritize improvements that yield the best value, starting with those that improve the high-value offerings discussed in Chapter 2.

Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×

Given the dual-use nature of the technologies involved, and the importance to commercial industry of the core activities, Option B also assumes that core cost share from non-DoD sources will continue.

The improved core processes and communication mechanisms of Option B will give DoD a better basis for assessing the long-term value of a continued public–private partnership for co-investment and for defending the DoD core budget accordingly. Appendix D identifies several potential communication mechanism improvements to be considered for DoD Strategic Goal 4, “Maximize Stakeholder Understanding of the Institutes.” The budget level will be set by DoD, but even if it remains at the level expected by Option A, the implementation of improvements and continuation of core funding for high-priority offerings will be more beneficial to DoD goals than will Option A. A summary of the implications for DoD goals is provided in Table 4.2.

OPTION C: TRANSITION TO DOD CUSTOMER MODEL

Option C transitions from the current focus on core activities to a new focus on projects driven by DoD needs and sponsored by DoD customers outside of the OSD ManTech office. The committee believes there is a clear opportunity to better

TABLE 4.2 Impact of Option B: Current Model with Improvements to Processes, Offerings, and ValueBased Core Funding

DoD Goal Implications
  1. Impactful R&D
  • Same as Option A, but mitigated by improvements that reduce the R&D contracting time and promote a stronger focus on DoD needs.
  1. Viable business plans
  • Like Option A, retains DoD role as a coinvestor at some level, but risks reduction in the scope of core activities despite more efficient use of resources.
  • Puts viability of some institutes at risk.
  1. Maximize value delivery
  • If core funding stays at projected Option A level, reduces influence on the ecosystem and its dualuse value to DoD.
  • Benefits from formal reviews of both shortterm and longterm value at renewal points.
  1. Stakeholder understanding
  • Includes several communication improvements that increase the breadth and depth of stakeholder understanding and engagement.
  1. Capable workforce
  • Same as A, plus improvements in crossinstitute coordination and adoption of best practices to enhance workforce education and training.

NOTE: DoD, Department of Defense; R&D, research and development.

Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×

connect the DoD Manufacturing USA institutes to the service ManTech programs, the broader science and technology (S&T) community, and the DoD acquisition and sustainment (A&S) communities in order to expand the impact of the DoD Manufacturing USA institutes for DoD.

The vision for Option C is that the DoD Manufacturing USA institutes move beyond the initial start-up phase to assume a prominent role in advanced manufacturing technology maturation for DoD. Table 4.3 shows how Option C differs from Options A and B in the actions needed by DoD and the institutes to connect with technology development activities at the front end of the TRL/MRL 4-7 window, and with technology implementation activities at the back end of the window. Under this option, the institutes would grow their program portfolios to provide customer-relevant offerings of expertise and (where applicable) equipment and facilities as a technology resource to the broad DoD community. Institutes would also offer relevant education and workforce development (EWD) project support to meet DoD needs, such as those identified in a recent U.S. Government Accountability Office report2 to maintain depot workforce skills. Institutes that succeed in offering solutions and capturing project-based direct support from DoD customer communities would both serve the business interests of their members and increase the number of projects that can absorb a share of the infrastructure costs of the institutes. In Option C, DoD customer-focused projects would tailor cost-share requirements (mandatory or optional) based on project objectives. For example, projects with high commercial potential might mandate industry cost share, while those unique to military applications might not. As noted in Chapter 2, during the workshop breakout II exercise, “Keep Doing, Stop Doing, Start Doing,” some members of the DoD stakeholder group proposed to “eliminate [the] cost-share requirement.”

Option C entails a shift from the DoD sponsor model in the start-up phase of the DoD Manufacturing USA institutes to a DoD customer model in the long-term engagement phase. The committee recognizes that this shift requires effort to build the connections necessary to generate customer project funding. A 3-year transition period is recommended by the study committee for this option. In this period, OSD ManTech can ascertain the most effective approach to retain important core functions, such as EWD and technology roadmapping. Option C gives the OSD ManTech office a greatly expanded role to facilitate institute connections to DoD customers, understanding of needs, and program development. This option assumes OSD will arrange assistance with S&T and ManTech organizations and build interfaces with OSD and service A&S organizations to facilitate the necessary customer connections.

___________________

2 U.S. Government Accountability Office, 2018, DOD Depot Workforce: Services Need to Assess the Effectiveness of Their Initiatives to Maintain Critical Skills, GAO-19-51, December, Washington, DC.

Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×

To meet DoD customer needs for speed of prototyping and smooth transition to production, this option also assumes that DoD will establish an Other Transaction Authority (OTA) interface with the institutes, either individually or through some networked mechanism.

Finally, Option C expects that an institute’s portfolio of core activities and projects will continue to include non-DoD sponsored activities supported by other federal or state organizations as well as commercial industry to contribute to the original dual-use mission of the DoD Manufacturing USA institutes.

Option C represents a substantial shift in engagement model and focus compared to Options A and B. Its primary focus is on increasing DoD customer-driven projects that deliver impactful R&D, implementation, and associated workforce development to meet DoD needs. Given the dual-use nature of the institutes’ technology areas, many of these projects will spin in commercial technologies or spin out commercial benefits so Option C engagement with the institute membership and capabilities will continue to help meet DoD goals. Under Option C, continued DoD support for core activities is possible where they add value, but secondary. A summary of the Option C impact on DoD goals is provided in Table 4.4.

TABLE 4.3 Option C as a Pathway to DoD Customer Communities

Option Addressable DoD Markets DoD Actions Institute Actions
  1. Current Plan
OSD ManTech Support fewer core activities Become more selfsustaining
  1. Improve Core
OSD ManTech Same as A, with improvements in core processes and network Same as A, with improvements in core processes and network
  1. Shift Focus to Customer Projects
Service ManTech S&T
  • Uses broad agency announcements, sometimes OTAs
  • Front end of TRL/MRL 47
Acquisition R&D
  • Increasing use of OTAs
  • Back end of TRL/MRL 47
Operations and maintenance and depots
  • Workforce development, modernization needs
Facilitate through JDMTP Facilitate connections
  • S&T communities of interest, research and engineering topten leaders
  • Roadmap matching
Facilitate connections
  • Create OTA interface
  • Broker transition agreements
Facilitate connections
  • Create rapid contracting interface
  • Depots sponsor projects
Understand ManTech needs Compete for S&T projects
  • Develop/market relevant capabilities
  • Use OTA business methods
Engage with Program Executive Offices
  • Leverage original equipment manufacturers, understand needs
  • Be a competitive business, go fast
Engage with depots
  • Understand needs
  • Competitive pricing
  • Fast, convenient contracting

NOTE: DoD, Department of Defense; JDMTP, Joint Defense Manufacturing Technology Panel; MRL, manufacturing readiness level; OSD, Office of the Secretary of Defense; OTA, Other Transaction Authority; R&D, research and development; S&T, science and technology; TRL, technology readiness level.

Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×

TABLE 4.4 Impact of Option C: Transition to DoD Customer Model

DoD Goal Implications
  1. Impactful R&D
  • Enhances the direct impact of institute R&D on DoD needs through customer projects. However, the gradual deemphasis (not abandonment) of core activities reduces DoD’s impact on the ecosystem it will rely on in the future.
  • There is also a risk that project sponsors will favor early or late TRL/MRL projects, leaving a gap in the “valley of death.”
  1. Viable business plans
  • Higher risk than Options A or B, in that agencydirected projects must be generated to provide the funding currently received as core funding used to fund unencumbered institute projects at the institutes. The risk is reduced through the proposed 3year transition period.
  1. Maximize value delivery
  • Improves integration of the institutes with DoD needs and enhances value delivery by increasing impact of institute R&D.
  • By adding an OTA contracting mechanism, the development and delivery of solutions for DoD will be further accelerated.
  • Potential negative impact on multiple current core functions of value to DoD based on available Option C core funding.
  1. Stakeholder understanding
  • Assign a major new role to OSD ManTech to facilitate direct institute connections to a wider set of DoD organizations, thereby increasing mutual understanding.
  1. Capable workforce
  • Embraces and supports projectfunded workforce education and training in projects that transition to dualuse supply chains and DoD’s depot workforce.

NOTE: DoD, Department of Defense; MRL, manufacturing readiness level; OSD, Office of the Secretary of Defense; OTA, Other Transaction Authority; R&D, research and development; TRL, technology readiness level.

OPTION D: TRANSFER CORE RESPONSIBILITIES TO THE NATIONAL PROGRAM OFFICE AT NIST

This option would phase out DoD core funding for the institutes after 5-7 years (as originally planned) and transfer responsibility to the NIST Advanced Manufacturing NPO (AMNPO) for all functions except DoD sponsorship of mission-related R&D projects. The rationale is that continued support of development of an ecosystem to benefit economic growth and global competitiveness is not a primary defense mission once the start-up phase is completed. Under the Revitalize American Manufacturing and Innovation (RAMI) (industrial) Act of 2014,3 Congress specified eight purposes for the National Network for Manufacturing Innovation program, all related to economic growth and competitiveness. RAMI established the AMNPO at NIST to act as a convener of the network of Manufacturing USA institutes and to oversee planning, management, and coordination of the program. Option D would depend on congressional action to authorize and appropriate funds for the NPO to support the federal share of core activities at the

___________________

3 Title VII of Division B of Public Law 113-235.

Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×

DoD Manufacturing USA institutes (including former DoD Manufacturing USA institutes) and to replace current DoD cooperative agreements with new contractual agreements for this purpose. DoD sponsorship of R&D projects would be contracted directly with the DoD Manufacturing USA institutes, using OTAs or other appropriate contracting mechanisms. Since the federal interface would shift from DoD to NIST, connection to DoD project sponsors would receive less help than Options A or B, and much less than Option C.

Option D may seem attractive to some in DoD as a way to free up defense resources, but it is far riskier for DoD goals than Options A, B, or C. If Congress does not support NIST taking on the role of core funding, the viability of the institutes is doubtful. If core funding is provided through NIST, DoD influence on the core agenda will no longer exist and the connection to DoD needs will be unworkably distant. A summary of the Option D impact on DoD goals is provided in Table 4.5.

OPTION E: NO CORE FUNDING OF INSTITUTES BEYOND INITIAL INVESTMENT

This option would eliminate DoD core funding for the institutes after 5-7 years (as originally planned), but, unlike Options A and B, Option E would ramp it down to zero. This is consistent with the original plan. It is anticipated that not all institutes, if any, will survive this model. The rationale is that those institutes that provide dual-use value to DoD would also have commercial value on a scale large enough to keep the institute afloat. The option assumes that to meet the core funding needs of the institutes, commercial investments would replace the DoD investment. DoD could continue to sponsor projects and take advantage of the commercial investment in

TABLE 4.5 Impact of Option D: Transfer Core Responsibilities to the National Program Office at NIST

DoD Goal Implications
  1. Impactful R&D
Loss of DoD influence on institute agendas. Shift in emphasis from dual use to commercial impact. DoD projects less likely.
  1. Viable business plans
Unsustainable if Congress does not fund. Consequence would be loss of sources for DoD projects and reduced likelihood of dualuse U.S. supply chains in areas of DoD interest.
  1. Maximize value delivery
Optimized for commercial impact, not DoD (except projects).
  1. Stakeholder understanding
Serious loss of connection with DoD customers.
  1. Capable workforce
Focused on commercial workforce, not defense industry or depots.

NOTE: DoD, Department of Defense; NIST, National Institute of Standards and Technology; R&D, research and development.

Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×

institute facilities and expertise, but customers would have to contract with individual institutes or directly with their members. Since Option E would no longer have OSD ManTech as a network manager and DoD interface facilitator, a likely result would be incoherence in DoD understanding of institute capabilities and institute understanding of DoD needs. Where institutes manage on their own to connect with DoD customers, engagement would entail multiple contractual vehicles and engagement interfaces. The risks associated with this model include a breakdown of the institute network; potential foreign engagement and influence of the institute; lack of participation and outreach to small and medium-size enterprises; and loss of some critical—if not all of the—institutes.

Like Option D, Option E might seem attractive to those in DoD who want to free up resources, but it is the highest-risk option in terms of impact on DoD goals. Option E is essentially abandoning the federal role in the public–private partnership at a time when development of the ecosystem for dual-use supply chains is far from complete, despite initial optimism that 5-7 years of DoD investing would be sufficient. A summary of the Option E impact on DoD goals is provided in Table 4.6.

Let the experiment reach its conclusion per the preliminary design. It’s time for the government to be a customer of the institutes, not an investor.

—DoD stakeholder interview

TABLE 4.6 Impact of Option E: No Core Funding of Institutes Beyond Initial Investment on DoD Goals

DoD Goal Implications
  1. Impactful R&D
  • R&D will no longer be focused on DoD requirements.
  • Loss of DoD influence on DoD Manufacturing USA institute agendas.
  • DoD impact only where projects fit.
  • Transition path of technology not clear.
  1. Viable business plans
  • DoD no longer strategic partner in business plan.
  • Loss of sources for DoD R&D projects and longterm risk to availability of U.S. supply chains.
  • Few institutes will have a viable business plan without federal core funding.
  1. Maximize value delivery
  • Agenda no longer focused on DoD requirements.
  • Institutes would have no assistance in connecting with DoD customers to maximizing value.
  1. Stakeholder understanding
  • DoD understanding of institutes’ capabilities and innovations would occur only where institutes succeed on their own in making connections. Institutes will have no DoD partner to assist with understanding of DoD needs.
  1. Capable workforce
  • If workforce development survives at all, it may not be suitable for DoD needs.

NOTE: DoD, Department of Defense; R&D, research and development.

Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×
Page 50
Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×
Page 51
Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×
Page 52
Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×
Page 53
Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×
Page 54
Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×
Page 55
Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×
Page 56
Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×
Page 57
Suggested Citation:"4 DoD Long-Term Manufacturing Institutes' Strategy: Business Model Options and Implications." National Academies of Sciences, Engineering, and Medicine. 2019. Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes. Washington, DC: The National Academies Press. doi: 10.17226/25417.
×
Page 58
Next: 5 Committee Findings and Recommendations »
Strategic Long-Term Participation by DoD in Its Manufacturing USA Institutes Get This Book
×
Buy Paperback | $65.00 Buy Ebook | $54.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

To effectively mature and transition DoD manufacturing science and technology advances into production, DoD must have access to a robust and responsive U.S. industrial base which is often driven by advanced manufacturing technologies. The Manufacturing USA institutes are considered crucial and game-changing catalysts that are bringing together innovative ecosystems in various technology and market sectors critical to DoD and the nation.

Since 2012, DoD has invested $600 million directly in its Manufacturing USA institutes with the understanding that the initial federal investment included (1) core funding and (2) one-time, start-up funding to establish the institutes within a period of 5 to 7 years. As the institutes now begin to reach year five, DoD is evaluating the effectiveness of the institutes in fulfilling their goals and the best on-going roles for the federal government, including on-going funding options, to ensure optimal benefit to U.S. competitiveness. This report reviews the role of DoD's investment to date in establishing its eight institutes as public–private partnerships and its engagement with each institute after it has matured beyond the start-up period.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!