National Academies Press: OpenBook

Waste Incineration and Public Health (2000)

Chapter: Executive Summary

« Previous: Front Matter
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×

Executive Summary

Incineration is widely used to reduce the volume of municipal solid waste, to reduce the potential infectious properties and volume of medical waste, and to reduce the potential toxicity and volume of hazardous chemical and biological waste. In the United States, more than 100 facilities incinerate municipal solid waste, and more than 1,600 facilities incinerate medical waste. Also, almost 200 incinerators and industrial kiln facilities, and many industrial boilers and furnaces combust hazardous and nonhazardous waste.

Whether incineration is an appropriate means of managing waste has been the subject of much debate in this country. A major aspect of the debate is the potential risk to human health that might result from the emission of pollutants generated by the incineration process; some of those pollutants have been found to cause various adverse health effects. Although such effects have generally been observed at much higher ambient concentrations than those usually produced by emissions from an incineration facility, questions persist about the possible effects of smaller amounts of pollutants from incineration facilities, especially when combined with the mix of pollutants emitted from other sources. The possible social, economic, and psychologic effects associated with living or working near an incineration facility also have been topics of concern.

This report was prepared by the National Research Council's Committee on Health Effects of Waste Incineration. The committee was formed to assess relationships between waste incineration and human health and to consider specific issues related to the incineration of hazardous waste, municipal solid waste, and medical waste. The committee was asked to consider various design, siting, and operating conditions at waste-incineration facilities with respect to releases

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×

of potentially harmful pollutants to the environment. It was also asked to consider appropriate health-based approaches for demonstrating that an incineration facility meets and maintains established levels of health protection. Issues related to communication of information on waste incineration were also within the study charge. The committee was asked to consider types of information that should be provided to government officials, industry managers, and the general public to help them in future efforts to understand and weigh the risks associated with waste incineration and its alternatives. Finally, the committee was asked to consider factors that might affect public perceptions of waste incineration.

The committee was not charged to assess risks posed by any particular waste-incineration facility or to compare the risks of incineration with risks posed by various waste-management alternatives, such as landfilling. The committee focused its attention on wastes that have reached an incineration facility—it was not asked to address the collection or storage of wastes at, or their transportation to, any incineration facility; nor was it asked to consider treatment of residual ash away from a facility.

WASTE-INCINERATION PROCESSES AND EMISSIONS

The principal gaseous products of waste incineration, like other combustion processes, are carbon dioxide and water vapor. And, like many combustion processes, incineration also produces byproducts such as soot particles and other contaminants released in exhaust gases, and leaves a residue (bottom ash) of incombustible and partially combusted waste that must be emptied from incinerator chambers and properly disposed. The composition of the gas and ash byproducts is determined, at least in part, by the composition of the wastes fed into an incineration facility. This feedstream composition can be altered by other waste-management activities, such as reducing the amount of waste generated, reusing materials, and recycling waste materials for use as feedstocks for various manufacturing processes.

The exhaust gases from waste incineration facilities may contain many potentially harmful substances, including particulate matter; oxides of nitrogen; oxides of sulfur; carbon monoxide; dioxins and furans; metals, such as lead and mercury; acid gases; volatile chlorinated organic compounds; and polycyclic aromatic compounds. Some pollutant emissions are formed, in part, by incomplete combustion that may in turn lead to the formation of pollutants such as dioxins and furans. The formation of products of incomplete combustion is governed by the duration of the combustion process, the extent of gas mixing in the combustion chamber, and the temperature of combustion. Good combustion efficiency depends upon maintaining the appropriate temperature, residence time, and turbulence in the incineration process. Optimal conditions in a combustion chamber must be maintained so that the gases rising from the chamber mix thoroughly and continuously with injected air; maintaining the optimal tempera-

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×

ture range involves burning of fuel in an auxiliary burner during startup, shutdown, and process upsets. The combustion chamber is designed to provide adequate turbulence and residence time of the combustion gases.

Operation of the incinerator also affects the emission of heavy metals, chlorine, sulfur, and nitrogen that may be present in the waste fed into the incinerator. Such chemicals are not destroyed during combustion, but are distributed among the bottom ash, fly ash, and released gases in proportions that depend on the characteristics of the metal and the combustion conditions. Mercury and its compounds, for example, are volatile, so most of the mercury in the waste feed is vaporized in the combustion chamber. In the cases of lead and cadmium, the distributions between the bottom ash and fly ash depend on operating conditions. At higher combustion-chamber temperatures, more of the metals can appear in the fly ash or gaseous emissions. Therefore, combustion conditions need to maximize the destruction of products of incomplete combustion and to minimize the vaporization and entrainment of heavy metals, especially when adequate control of emissions is lacking. Formation of oxides of nitrogen is promoted by high temperatures and the presence of nitrogen-containing wastes.

In addition, air-pollution control devices can greatly influence emissions from waste-incineration facilities. For example, airborne particles can be controlled with electrostatic precipitators, fabric filters, or wet scrubbers. Hydrochloric acid, sulfur dioxide, dioxins, and heavy metals can be controlled with wet scrubbers, spray-dryer absorbers, or dry-sorbent injection and fabric filters. Oxides of nitrogen can be controlled, in part, by combustion-process modification and ammonia or urea injection through selective catalytic or noncatalytic reduction. Concentrations of dioxins and mercury can be reduced substantially by passing the cooled flue gas through a carbon sorbent bed or by injecting activated carbon into the flue gas.

With current technology, waste incinerators can be designed and operated to produce nearly complete combustion of the combustible portion of waste and to emit low amounts of the pollutants of concern under normal operating conditions. In addition, using well-trained employees can help ensure that an incinerator is operated to its maximal combustion efficiency and that the emission-control devices are operated optimally for pollutant capture or neutralization. However, for all types of incinerators, there is a need to be alert to off-normal (upset) conditions that might result in short-term emissions greater than those usually represented by typical operating conditions or by annual national averages. Such upset conditions usually occur during incinerator startup or shutdown or when the composition of the waste being burned changes sharply. Upset conditions can also be caused by malfunctioning equipment, operator error, poor management of the incineration process, or inadequate maintenance.

Typically, emissions data have been collected from incineration facilities during only a small fraction of the total number of incinerator operating hours and generally do not include data during startup, shutdown, and upset condi-

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×

tions. Furthermore, such data are typically based on a few stack samples for each pollutant. The adequacy of such emissions data to characterize fully the contribution of incineration to ambient pollutant concentrations for health-effects assessments is uncertain. More emissions information is needed, especially for dioxins and furans, heavy metals, and particulate matter.

Recommendations

Government agencies should continue to improve—or in some cases should begin—the process of collecting, and making readily available to the public, substantially more information on the following:

  • The effects of design and operating conditions on emissions and ash. Such information should show how specific emissions and ash characteristics are affected by modifying the operating conditions of an incinerator to maximize its combustion efficiency. It should also indicate the types and combinations of operating conditions that optimize the effectiveness of emission-control devices.

  • New combustor designs; continuous emission monitors; emissions-control technologies; operating practices; and techniques for source reduction, fuel cleaning, and fuel preparation, including records of demonstrated environmental performance and effects on emissions and ash.

  • Emission and process conditions during startup, shutdown, and upset conditions. Emissions testing has usually been performed under relatively steady-state conditions. However, the greatest emissions are expected to occur during startup, shutdown, and malfunctions. Such emissions need to be better characterized with respect to possible health effects. Therefore, data are needed on the level of emissions, the frequency of accidents and other off-normal performance, and the reasons for such occurrences.

ENVIRONMENTAL PATHWAYS OF HUMAN EXPOSURE

After pollutants from an incineration facility disperse into the air, some people close to the facility may be exposed directly through inhalation or indirectly through consumption of food or water contaminated by deposition of the pollutants from air to soil, vegetation, and water. For metals and other pollutants that are very persistent in the environment, the potential effects may extend well beyond the area close to the incinerator. Persistent pollutants can be carried long distances from their emission sources, go through various chemical and physical transformations, and pass numerous times through soil, water, or food.

Dioxins, furans, and mercury are examples of persistent pollutants for which incinerators have contributed a substantial portion of the total national emis-

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×

sions. Whereas one incinerator might contribute only a small fraction of the total environmental concentrations of these chemicals, the sum of the emissions of all the incineration facilities in a region can be considerable. Many older incinerators have been closed down and replaced by modern low-emitting units, so the relative contribution of incineration to the current concentrations of chemicals in the environment is uncertain.

Results of environmental monitoring studies around incineration facilities have indicated that the specific facilities studied were not likely to be major contributors to local ambient concentrations of the substances of concern, although there are exceptions. However, methodological limitations of those studies do not permit general conclusions to be drawn about the overall contributions of waste incineration to environmental concentrations of those contaminants.

Although emissions from incineration facilities can be smaller than emissions from other types of sources, it is important to assess incinerator emissions in the context of the total ambient concentration of pollutants in an area. In areas where the ambient concentrations are already close to or above environmental guidelines or standards, even relatively small increments can be important.

Computational models for the environmental transport and fate of contaminants through air, soil, water, and food can provide useful information for assessing major exposure pathways for humans, but, in general, they are not accurate enough to provide estimates of overall environmental contributions from an individual facility within a factor of 10. The models suggest that fish consumption is the major pathway of human exposure to mercury, and that meats, dairy products, and fish are potentially the major exposure pathways for dioxins and furans. For assessment of persistent pollutants, there is usually a poor correlation between total ambient concentrations and local emissions from an incinerator.

Recommendations
  • Environmental assessment and management strategies for emissions from individual incineration facilities should include a regional-scale framework for assessing dispersion, persistence, and potential long-term impacts on human health.

  • Better material balance information—including measurements of source emissions to air and deposition rates to soil, water, and vegetation—are needed to determine the contribution of waste-incineration facilities to environmental concentrations of persistent chemicals. The variation of these emissions over time needs to be taken into account: for the short term to determine if any important emission increases occur at an incineration facility, and for the long term to measure changes due to the replacement of less-efficient incinerators with modern, lower-emitting units.

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
  • To facilitate evaluation of the overall contributions of incinerators to pollutants in the environment, estimates of dispersion of incinerator emissions into the environment should be gathered. The additional information would allow conversion of emissions estimates into environmental concentration estimates.

  • Government agencies should link emissions and facility-specific data from all incineration facilities to characterize better the contributions of incinerators to environmental concentrations. Existing databases should be linked to provide easy access to specific operating conditions of an incinerator, height and diameter of the emission stack, flow rate and temperature of the gases leaving the stack, local meteorological conditions, air-dispersion coefficients as a function of distance from a facility, and precise geographic location of the emission point. Data should be standardized for uniform reporting.

HEALTH EFFECTS

Few epidemiologic studies have attempted to assess whether adverse health effects have actually occurred near individual incinerators, and most of them have been unable to detect any effects. The studies of which the committee is aware that did report finding health effects had shortcomings and failed to provide convincing evidence. That result is not surprising given the small populations typically available for study and the fact that such effects, if any, might occur only infrequently or take many years to appear. Also, factors such as emissions from other pollution sources and variations in human activity patterns often decrease the likelihood of determining a relationship between small contributions of pollutants from incinerators and observed health effects. Lack of evidence of such relationships might mean that adverse health effects did not occur, but it could also mean that such relationships might not be detectable using available methods and data sources.

Pollutants emitted by incinerators that appear to have the potential to cause the largest health effects are particulate matter, lead, mercury, and dioxins and furans. However, there is wide variation in the contributions that incinerators can make to environmental concentrations of those contaminants. Although emissions from newer, well-run facilities are expected to contribute little to environmental concentrations and to health risks, the same might not be true for some older or poorly run facilities.

Studies of workers at municipal solid-waste incinerators show that workers are at much higher risk for adverse health effects than individual residents in the surrounding area. In the past, incinerator workers have been exposed to high concentrations of dioxins and toxic metals, particularly lead, cadmium, and mercury.

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Recommendations
  • To increase the power of epidemiologic studies to assess the health effects of incinerators, future multi-site studies should be designed to evaluate combined data from all facilities in a local area as well as multiple localities that contain similar incinerators and incinerator workers, rather than examining health issues separately site by site.

  • In addition to using other exposure-assessment techniques, worker exposures should be evaluated comprehensively through biological monitoring, particularly in combination with efforts to reduce exposures of workers during maintenance operations.

  • Assessments of health risks attributable to waste incineration should pay special attention to the risks that might be posed by particulate matter, lead, mercury, dioxins and furans.

  • Health risks attributable to emissions resulting from incinerator upset conditions need to be evaluated. Data are needed on the levels of emissions during process upsets as well as the frequency, severity, and causes of accidents and other off-specification performance to enable adequate risk assessments related to these factors. Such information is needed to address whether off-normal emissions are important with respect to possible health effects.

  • The Environmental Protection Agency (EPA) and the Occupational Safety and Health Administration (OSHA) should continue striving to improve coordination of enforcement activities between the two agencies to protect the health of incineration workers.

REGULATION OF WASTE-INCINERATION FACILITIES

Waste-incineration facilities are required to comply with a combination of federal, state, and local regulations that vary from place to place and time to time. EPA has proposed or has promulgated separate regulations for incineration of medical, hazardous, and municipal solid wastes to reduce emissions to values achieved by the best-controlled 12% of incinerators. This standard is known as “maximum achievable control technology,” or MACT. Facilities that meet the MACT requirements are generally expected to have substantially lower emissions. The intended reduction in emissions would lower exposures and possible risks to populations surrounding incinerators, especially for particulate matter, lead, mercury, and other metals. However, the effects of such regulations are less apparent when emissions of the most-important pollutants from all incineration sources are considered on a regional scale. For example, the collective contribution of dioxins from multiple incineration sources might remain problematic despite MACT regulations. Because the collective effects of incin-

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×

erators on metropolitan or regional scales are largely unknown, it is uncertain whether implementation of MACT standards for incinerators will substantially reduce the actual risks posed by persistent environmental pollutants at those scales.

Based on estimates of incinerator emissions, environmental transport and fate, potential total exposure, and relative toxicity of the individual substances inferred from studies not involving incineration, the committee concludes

  • Compliance with MACT regulations is expected to reduce substantially local population exposures, especially for particulate matter, lead, mercury and other metals, acidic gases, and acidic aerosols.

  • Substantial concerns about regional dioxin and furan exposures and moderate concerns about regional exposures to metals are not expected to be relieved by MACT regulations, because the regulations may not adequately reduce risks attributable to cumulative emissions on a regional basis.

  • Substantial concerns about workers' exposures to particulate matter, lead, mercury, and dioxins and furans are not expected to be relieved by MACT compliance, because those regulations were not designed to affect workers' exposures.

Recommendations
  • Technologies used in other countries for combustion, emission control, continuous emission monitoring, and public dissemination of information, as well as optimum operating practices, should be actively studied and considered for adoption in the United States.

  • All regulated medical-waste incinerators and municipal solid-waste combustors should have uniform limits for each pollutant, irrespective of plant size, design, age, or feedstock, as is the case for hazardous-waste combustors. The same technology for air-pollution control is applicable to small and large facilities. Allowing less-stringent limitations for some designs or sizes is inconsistent with the principle of minimizing risks of health effects.

  • Government agencies should encourage research, development, and demonstration of continuous emission monitors (CEMs), dissemination technologies, and computer programs that automatically analyze, summarize, and report CEM data. In addition to the CEMs already required in municipal solid waste incinerator rules, requirement of CEMs for hydrochloric acid and particulate-matter should be considered on such incinerators. Also, as soon as a mercury monitor that measures ionic and metallic forms of mercury emissions has been proven reliable, EPA should consider its use for domestic incinerators. The same approach should be used for

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×

other monitors, including those for other heavy metals and dioxins and furans. EPA should also explore the utility of technologies such as direct electronic transmission and display to disseminate CEM data to regulatory authorities and the public. Providing such data and data summaries on the Internet should be considered.

  • In future regulatory decision-making, greater consideration should be given to emission levels achieved in actual performance of incinerators, including process upset conditions (described earlier). In monitoring for compliance or other purposes, data generated during the intervals in which a facility is in startup, shutdown, and upset conditions should be included in the hourly emission data recorded and published. It is during those times that the highest emissions may occur, and omitting them systematically from monitoring data records does not allow for a full characterization of the actual emissions from an incineration facility.

SOCIAL ISSUES AND COMMUNITY INTERACTIONS

In addition to possible physical-health effects, a waste-incineration facility may have other effects on individuals, groups, or the entire population in the surrounding area. The effects might be economic (such as job creation or decrease in property values), psychological (such as stress or stigma), or social (such as community factionalization or unity). However, there is little rigorous information on those impacts of waste-incineration facilities.

Citizen concerns need to be heard and understood. Conflicts can increase the time and expense of conducting waste incinerators and other facilities that might be potentially beneficial to society. Opposition to the facilities also can indicate that important concerns are not being addressed adequately.

Much public opposition to waste incineration might be due to a lack of understanding of the relative health risks posed by incineration in comparison with other waste-management methods. But health is not the only issue, and the differences between expert and public perceptions are not due merely to differences in information and understanding; they can also be due to differences in social values. People's perceptions are often extraordinarily resistant to change, in part because they reflect underlying values. Efforts that ignore or try to change these perceptions radically are likely to fail. Risk communication should accept as legitimate the perceptions and concerns of various members of the public and involve them in consultative, participatory processes. Not only do members of the public have a right and responsibility to be involved in the assessment and management of hazards in their communities, but such involvement might result in improved assessments and management strategies.

Developing effective participatory programs is very difficult, but some general principles are beginning to emerge. The process of public involvement should be open, inclusive, and substantive, and members of the public in an

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×

affected area should be involved early and often. Major concerns are likely to include issues of safety, compensation, and local oversight and control. Satisfying the public's need for information on incinerator safety requires continual assessment and demonstration of regulatory compliance with existing standards.

Recommendations
  • The social, psychological, and economic effects of proposed and existing waste incineration facilities should be assessed, and mitigation of or compensation for such effects should be considered where appropriate.

  • The boundaries of an area potentially affected by a waste incinerator should not be defined at the outset by a particular community's political boundaries or jurisdiction. Instead, the assessment area should be based on the geographic extent over which various effects could reasonably occur. Such an approach permits a more-accurate analysis of the impacts. It also permits a better understanding of problems that might arise in connection with information exchange among all persons involved with, or affected by, decision-making concerning the facility.

  • Proponents of an incineration facility should assume, in dealing with local communities, that they (the proponents) should make the case for a new or expanded facility, especially if a waste combustor is not used solely within a manufacturing facility to incinerate waste on site.

  • If a new or expanded facility is contemplated, local citizens might consider conducting their own assessments of the proposed facility and its effects through various approaches, including, for example, hiring independent consultants that members of the community trust, seeking technical-assistance grants from the government, or finding technical advisers who are acceptable to both sides.

  • Particular attention should be paid to equity issues when a facility is to be placed in a community that is already experiencing disproportionate health, environmental, or socioeconomic burdens.

  • Government agencies should improve—or in some cases begin—to collect and make readily available, information on site-specific and large-scale empirical research on possible socioeconomic impacts of waste-incineration facilities on their host areas. To the extent practicable, efforts should be expanded to gather such information routinely before and during operation of incineration facilities that have the potential to have more than a minor socioeconomic impact.

UNCERTAINTY AND VARIABILITY

Incineration facilities vary with regard to types of waste incinerated, operating practices, allowable magnitudes of emission, emission-control technologies,

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×

types of substances emitted, environmental conditions, proximity to other sources of contaminants, and frequency of process upsets. The people who might be exposed to the contaminants are likely to differ in their susceptibilities and activity patterns. Some uncertainties are specific to waste incineration, and some are inherent in any activity that releases contaminants into the environment.

Some of the uncertainties and variability can be reduced or better accounted for; others will remain intractable. The most-effective decisions concerning the siting, design, operation, and regulation of incineration facilities are the ones that take uncertainty and variability fully into account.

Recommendations
  • Incinerator risk assessments should include the following components of uncertainty and variability analyses

    • An estimate of the variability and uncertainty distributions of all input values and their effects on final estimates.

    • A sensitivity analysis to assess how model predictions are related to variations in input data.

    • Variance-propagation models that show how the variability and uncertainty of final results are tied to the uncertainties and variabilities associated with the various models, their inputs, and assumptions used throughout the risk assessment.

The committee's evaluation of waste incineration and public health was substantially impaired by the lack of available compilations of the ambient concentrations of pollutants resulting from incinerator emissions. In addition, large variabilities and uncertainties associated with risk-assessment predictions often limit the ability to define risks posed by incinerators.

Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 1
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 2
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 3
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 4
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 5
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 6
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 7
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 8
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 9
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 10
Suggested Citation:"Executive Summary." National Research Council. 2000. Waste Incineration and Public Health. Washington, DC: The National Academies Press. doi: 10.17226/5803.
×
Page 11
Next: Scope of the Committee's Effort »
Waste Incineration and Public Health Get This Book
×
Buy Hardback | $81.00 Buy Ebook | $64.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

Incineration has been used widely for waste disposal, including household, hazardous, and medical waste—but there is increasing public concern over the benefits of combusting the waste versus the health risk from pollutants emitted during combustion. Waste Incineration and Public Health informs the emerging debate with the most up-to-date information available on incineration, pollution, and human health—along with expert conclusions and recommendations for further research and improvement of such areas as risk communication. The committee provides details on:

  • Processes involved in incineration and how contaminants are released.
  • Environmental dynamics of contaminants and routes of human exposure.
  • Tools and approaches for assessing possible human health effects.
  • Scientific concerns pertinent to future regulatory actions.

The book also examines some of the social, psychological, and economic factors that affect the communities where incineration takes place and addresses the problem of uncertainty and variation in predicting the health effects of incineration processes.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!