National Academies Press: OpenBook

Improved Surface Drainage of Pavements: Final Report (1998)

Chapter: Chapter 3 Selection and Development of Models for PAVDRN

« Previous: Chapter 2 Literature Review and Current Practice and Techniques for Improved Surface Drainage
Page 45
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 45
Page 46
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 46
Page 47
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 47
Page 48
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 48
Page 49
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 49
Page 50
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 50
Page 51
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 51
Page 52
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 52
Page 53
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 53
Page 54
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 54
Page 55
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 55
Page 56
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 56
Page 57
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 57
Page 58
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 58
Page 59
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 59
Page 60
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 60
Page 61
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 61
Page 62
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 62
Page 63
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 63
Page 64
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 64
Page 65
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 65
Page 66
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 66
Page 67
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 67
Page 68
Suggested Citation:"Chapter 3 Selection and Development of Models for PAVDRN." Transportation Research Board. 1998. Improved Surface Drainage of Pavements: Final Report. Washington, DC: The National Academies Press. doi: 10.17226/6357.
×
Page 68

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

CHAPTER 3 SELECTION AND DEVELOPMENT OF MODELS FOR PAVDRN In order to develop guidelines for Improving the drainage of water from pavement surfaces, it was necessary to select a mode! for predicting the depth of sheet flow on pavement surfaces. Since the maximum allowable water fun thickness is the min~murn flow depth at which hydropl~nmg is Initiated, it was also necessary to select a model that can be used to predict the onset of hydroplaning as a function of water fun thickness. A literature search was conducted to identify and evaluate water film thickness and hydroplaning models ~ the existing literature. From the literature search, a one-~mensional, steady-state form of the kinematic wave equation was selected for the prediction of the depth of sheet flow. Additional development of the mode! was also undertaken as cart of this protect. , . ~ The models arid predictive equations that are contained ~ PAVDRN are described In this section. A more comprehensive discussion of surface flow models and the development of values for Manmng's n can be found In Appendices B and C and the references cited therein. WATER lILM THICKNESS MODEL Before discussing the water film thickness model, the terms water fihn thickness (WFT), mean texture depth (MTD), and water depth, y, must be clearly be defined (see figure I). Water depth is defined as the total thickness of the water film on the surface of the 45

pavement. It is the sum of the MTD and Me WFT. The water below the MTD is trapped in the macrotexture and is considered immobile and does not contribute to the flow depth, y. The WFT is the thickness of Me water fihn above the tops of the asperities on the pavement surface. The total depth of flow, y, is the thickness of the WFT plus the MTD. There are two general types of models that can be used to detenn~ne water film thickness: (~) an analytical mode} and (2) an empirical model. Bow types have been developed and used for this purpose. Empirical Mode! A one~mensional, steady-state model was developed by Gallaway f2) as presented in equations 3 and 4: WFT = 0.003726 L0519 i0.s62 MTD0.l2s s0-364 and where - MTD y = WET + MTD (3) (4) WFT = Water film thickness (in) (1 In 25.4mm) L Plane length of Towpath (ft) (1 It = 305 mm) 46

i = Rainfall intensity (in/h) MID = Mean texture depth (in) Pavement slope (mlm) Depth of water contributing to flow (in) (1 inlh = 25.4 mmJh) (1 in = 25.4 mm) (1 in = 25.4 mm) (1 in = 25.4 mm) In equations 3 and 4, the flow path, L, is presumed to be over a simple, planar surface. Gallaway's equation is based on an extensive set of water depth data for a variety of pavement types. The equation, however, does not contain a variable, such as M~nning's n, to describe the hydraulic resistance of the pavement surface. The equation was developed by combining data from pavements with different types of surfaces in a single regression analysis. Since Gallaway's equation does not include a term for the hydraulic resistance of the pavement surface, does not differentiate between different surfaces, and is empirical, the equation was not considered for use ~ this project. One-Dimensional Analytical Models Two analytical models were considered during the project. The first is a fully dynamic model based on the principles of conservation of mass and momentum. The model has been used by many investigators to represent the equations of state for shallow wave motion, equations 5 and 6. Equations 5 and 6 represent spatially varied, unsteady flow in one · ~ dlmenslon. 47

dh flu Sh + h- + u = ~ - f = ~`5' at fix fix where Depth of flow u - Spatially averaged velocities (x - directions . 1 I Rainfall rate over the domain Infiltration rate Rainfall rate adjusted for infiltration em + u ~ + g ~ = g(Sox Sfx) h h (6, where u, h, i, and f are the same as described In equation 5 and g - Acceleration due to gravity (32.2 ft/s 2 or 9.~1 m/s 2) Sax Sex vr Slope of the flow path In the x-direction Slope of the energy grade Ime In the Erection Terminal rainfall velocity Ox - Angle of rainfall input with respect to the x-axis The last term on the right-hand side of equation 6 represents the momentum due to the angle of incidence of rainfall velocity In the Indirection. The term By is often taken to be 48

negligible; Pus costly can be assumed equal to zero, and the right-most tenn is dropped from the equation. Under steady-state conditions where the friction slope, Sf,, , is equal to the slope of the flow plane, SOx, equations 5 and 6 simplify to a form known as the kinematic wave equations as presented in equations 7 through 9: hen = ~ teq teq = where (7) ( I) ( ~ I) u = ahm~1 (8) (9) he = Equilibrium water flow depth (ft)(1 It = 305 man) i = Excess rainfall rate (ft3/s/ft2)(1 ft3/s/ft2 = 305 mm3/s/mTn2) to = Time to equilibrium (s) L = Plane length (ft)(1 It = 305 mm) a = Friction loss coefficient m = Friction loss exponent u = Velocity of flow (ft/s)(1 ft/s 305 mm/s) Equations 7 through 9 represent the kinematic wave solution for steady-state, one~'mensional flow. 49

Two-Dimensional Analytical Models An analytical two-~mensional flow mode! written by Zhang and Cundy (33) was evaluated as part of this study. Their mode] is representative of two-~mensional models and illustrates the difficulties that are typical of two-dimensional models. The primary limitation of their mode} is the lack of stability and convergence In the solutions. Stability and convergence are relatively easy to obtain with sets of linear equations, but difficult to acquire win ache non linear sets of equations implicit in the Zhang and Cundy model. The computational stability and convergence for nonlinear sets of equations are usually obtained by assuming linearity and using the linear solution as a conservative first approximation of the nonlinear case. As a consequence, extremely small tune steps are used that result In dramatically Increasing execution times as ache geometric complexity of the flow surfaces augments. For a multilane pavement, this may result in hundreds of thousands of iterations to reach equilibrium conditions. Therefore, no further use was made of two~mensional models, which are discussed in Appendix B. Mode} of Choice The one~imensional kinematic model, represented by equations 7 through 9, was chosen as the preferred model for predicting water film thickness. This mode} is based on theories and includes a variable, M~nmng's n, that accounts for the hydraulic effect of surface roughness on water depths. The one~mensional, steady-state form of me model was used 50

developing the surface drainage guidelines and the PAVDRN program. The selection of the one~mensional flow equation was determined by its computational stability and efficiency of solution. The flow domain, i.e. flow paths and channels, for a one-~unensional model must be defined by the user or must be established by an analysis of the topography of the surface prior to applying equations that determine flow, depth, and/or velocity. For example, PAVDRN analyzes the topography of a section and determines the longest flow path length before applying the kinematic wave equation to determine water film thickness at points along the flow path. The longest flow path is determined from geometric conditions as the path from the point where Me water falls on the pavement to the pout where it exits the surface of the pavement. where n L 1 WFr = The following equation is used In PAVDRN to calculate the water fiDn thickness: - MID 36.1 Sash Mann~ng's roughness coefficient Drainage path length (in) Rainfall rate (in/h) 51 (10) (1 in = 25.4 mm) (1 in/in = 25.4 mm/in)

S = Slope of drainage path (mm/mm) MID = Mean texture depth (in) (1 ~ = 25.4 mm) Values of water film thickness calculated according to equation 10 are presented In figure 8. Subsurface Flow Mode} For porous asphalt surfaces, flow within the porous asphalt layer parallel to the pavement surface must be considered. Two options were explored for the subsurface flow model. The first was based upon ache consideration of three-dunensional, fully saturated flow, represented by equation ~ ~ . The second, a one~unensional model, is discussed In the following. where _ (Kxx She fix fix h _ Kss = _ (Kyy ah) + ~ (Kzz ah) W-S ah (11) BY Liz Liz s St Piezometric head or potential Hydraulic conductivity of the porous material in the direction of the . · . prmc~pa1 axes W = Sources arid sinks of water Ss = Storage coefficient or specific storage of the porous material 52

- Portland cement concrete, MTD = 0.91 mm, Manning's n = 0.031, - ~ Dense graded asphalt concrete, MTD = 0.91 mm, Manning's n - 0.0327, Open graded asphalt concrete, MTD = 1.5 mm, Manning~s n = 0.0355 100 90 80 E - ~n to t' 50 - e~ ~ 40 a) - ~ 30 70 60 20 10 O- i '.~k MY , ad/ it,' a. ~ Slope of flow plane: 2%, Rainfall intensity: 40 mm/in 1 - 0 5 10 15 20 25 Drainage path length, m Figure 8. Water film thickness versus distance along flow path for several pavement surfaces as calculated using PAVDRN. 53

The solution of equation ~ ~ for the quantity of flow can Include the full dynamic nature of the effects of hydroplaning In the porous asphalt drainage layer. However, the computational effort required to arrive at a solution for either a two- or three-~mensional mode! is unjustified when the desired solution is the surface water film thickness. In this case a one-~vmensional mode] is sufficient. In some cases, the multidimensional models do not converge and require operator intervention In selecting different boundary conditions or, in the case of transient analysis, varying time steps and computational grids. The other option for flow through porous asphalt, a steady-state, one~mensional model, has several advantages. Like the one-~mensional surface How model, it is unconditionally stable. As a consequence, little or no operator intervention is necessary to arrive at a solution. Appropriate material properties can be quantified with a reasonable level of effort. Therefore, the one-~nnensional surface flow model, which was modified as described in the following, was chosen to compute water film thicknesses on porous pavements. For dete~n~ng water film thickness on porous pavement sections it is necessary to modify equation 10 to account for the infiltration rate. The addition of a term to account for infiltration rate results In equation 12. This form of the equation was used In PAVDRN to estimate the water film thickness for porous surfaces: DIVEST . n L T L 36.1 3.6 - MTD 54 (12)

where and I . 1 f f = MANNING'S N n = Mann~ng's roughness coefficient (i -f) -Excess rainfall rate (in/h) Rainfall rate fiItracion rate or permeability of pavement (iffy) (1 in/in = 25.4 mm/in) (1 inA1 = 25.4 mm/in) (1 inlh = 25.4 mm/in) In order to predict the water fihn thickness that occurs on a pavement surface during sheet flow, as presented In equations 10 and 12, Maurung's n must be known. The hydraulic roughness of a surface, Mann~g's n, can be expressed In terms of an e-value as used above and defined by Manning (34J. ManT~ng's e-value is surface-specific, requiring different expressions for different surfaces. During the course of this project, the hydraulic resistance of three different types of pavement surfaces was determined: . Portland cement concrete · Porous asphalt . Dense-graded asphalt concrete 55

A great deal of experimental data that can be used to determine Manning's e-values is available in the literature (4,35,36), and these data were reanalyzed during this project to verify the work of the previous researchers. However, additional experimental data were needed in order to extend values of Manning's n to rough Portland cement concrete surfaces and to porous asphalt surfaces. Manning's n must be determined through laboratory or field experimentation during which the water film thickness is observed as a function of rainfall intensity on different surfaces. The procedure used to establish Manning's n may be summarized as follows and is presented in detail in Appendix C. Determination of Mann~ng's n Manning's n is a function of the nature of the surface texture. Therefore, it is necessary to consider Portland cement concrete, dense graded asphalt concrete, and porous asphalt each as separate cases with a unique relationship for each surface. Manning's n can be determined experimentally under either artificial or natural rainfall. An artificial rainfall simulator that had been used in previous projects at Penn State was available and used for this study. The facility is well calibrated and produces uniform rainfall rate over an area of approximately 3 m by 10 m (29). Given the unpredictability of natural rainfall, this facility was used to generate the experimental data needed to extend ManIiing's n to larger Reynold's numbers on Portland cement concrete and to determine Mann~ng's n for porous asphalt. Details of the experimentation are given in Appendix C of this report. 56

Manning's equation (34) may be written as: q hS'3 so (13) n where q = Quantity of flow per unit width (m3/s/m) h = Depth of flow (m) Sox - Slope of the flow plane In direction of flow (m/m) ~Mamling's roughness coefficient M~iing's equation applies to conditions of turbulent (rough) flow. Flow is considered turbulent because of the impact of raindrops on relatively thin Dims of water flowing over pavement surfaces (34J. Equations 14 and 15 can be derived from equations 13 or 9: |.0 I/2 a= Sax n and s m= 3 Relationships for Mann~ng's n used In PAVDRN (14) (15) The regression analyses and assumptions used to derive the relationships for Manning's n that are used In PAVDRN are detailed In Appendix C. The following equations, based on 57

experunental data and the regression of the data with various forms of equations 13 through 15, were developed and used In PAVDRN to determine Manning's n: I. Portland cement concrete surfaces: n 0 319 (NR ~ 1000) (16) NOSO2 (NR ~ 50O) (17) 2. Dense-graded asphalt concrete : n = 0.0823 N~0~74 (~) 3. Porous asphalt concrete: 1.490 S 0 306 N 0.424 (19) where NR = q 58 (20)

and NR - Reynold's number q = Quantity of flow per unit width (m31slm) v = Kinematic viscosity of water Equations 16 through 19 are presented graphically In ISgures 9 through 12. HYDROPLANING SPEED MODEL The hydroplaning model selected for the study is based upon the work of Gallaway and his colleagues (4) and as further developed by others (37, 38). On the basis of the work reported by these authors, for water hum thicknesses less than 2.4 mm (0.095 ill), the hydroplaning speed is determined by: HPS = 26.04 WFI-0259 where (21) HPS = Hydroplaning speed (mi/h) WFr - Water film thickness (in) (1 mi/h = 1.61 1an/h) (1 in 25.4 mm) For water film thicknesses greater than or equal to 2.4 mm (0.095 in), the hydroplaning speed IS: 59

. 0.12 0.10 0.08 to ·= 0.06 0.04 0.02 0.00 500 ~ NR ~ 1 000, Water temperature = ~ SAC. Ago. lb - ~ ., - _, ~ ., R ain fall intensity = ~ mcn/h R ainfall intensity = ~ O mm/in - R ainfall intensity = 20 mcn/h \ \ - b R ainfall intesity = 40 mm/in R ainfall intensity = 60 mm/in - 10 30 50 70 90 110 Length of flo w path, m Figure 9. Manning's n versus length of flow path for various rainfall rates, Portland cement concrete, 500 < NR < 19000. 60

0.12 0.10 0.08 0.06 w 0.04 0.02 0.00 10 l NR ~ 50O, Water temperature = ~ SAC. \ -\ ~ \ \ ~ - · - - Rainfall intensity = 5 mm~h Rainfall intensity = 10 mm~h - - - - - - Rainfall intensity = 20 mm~h Rainfall intensity = 40 mm~h - Rainfall intensity = 60 mm~h - 30 50 70 Length of Towpath, m 90 110 Figure 10. Mannir g's n versus length of flow path for various rainfall rates, Portland cement concrete, NR < 500 61

0.06 0.05 0.04 a) ·' 0.03 ce 0.02 0.01 0.00 - . - - Water temperature = 1 0°C. - - - Rainfall intensity = ~ mm~h Rainfall intensity = JO mm/in Rainfall intensity = 20 mm/in Rainfall intensity = 40 mm/in Rainfall intensity = 60 mm/in ~ ~ ~ ~ ~a c I ~ _ _ __ ~ ~ 1 0 30 50 70 90 1 1 0 Length of Towpath, m Figure ~ ~ . Mar mr~g's n versus length of flow path for various rainfall rates, dense-graded asphalt concrete. 62

0.25 0.20 0.15 v, - ._ ~5 0.10 0.05 0.00 Water temperature = 1 0°C | Rainfall intensity= ~ mm/in | \ --- Rainfall intensity = 10 mm/in \ ~ Rainfall intensity = 20 mmfh \ ---- Rainfall intensity = 40 mm/in \ \ \ ~ Rainfall inte laity = 60 mmlh .-, ____~~ , ~ . , ,,,, _ _ __ _ _, ~ - . _, - - - ~ · - - - - - _ · - -._. _, - - _ . _ _._ _._ _._ . 1 0 30 50 70 90 1 1 0 Length of flow path, m Figure 12. Manning's n versus length of flow path for various rainfall rates, porous asphalt concrete. 63

HPS = 3.09 A where A is the greater of the values calculated using equations 23 and 24: 10.409 ~ 3 507 FIT 0 06 or (22) 28.952 7 817 WET 0.06 - (23) MID 0.14 (24) The model predicts the onset of hydroplaning on the basis of the water film thickness where water hen thickness is the thickness of the wafer film above the mean tenure depth, as presented In figure 1. The results of equations 21 through 24 are shown graphically ~ figure 13. The mean texture depth can be determined from sand patch or micro profile measurements. Suggested levels of macrotexture are presented In the guidelines for design situations where acme measurements are not available. Although the hydroplaning prediction models (equations 2 through 24) are empirical, they represent the state of the art: The development of rational equations was considered too ambitious an undertaking given the complexity of We problem, the resources required, and the extent of the data that would be needed for a rational model. 64

CD ~ O · . . to to 11 11 11 ~ Q Q C~e ~ C - e C~e t I I I \ee ( - e c~et \e C~] (~ (-e ~ ~ ~ cr cr t ~e lLi l]J E ~ ~ ~ ~ · . . · C ~C~e C\e N V ~ ~ ~ ~ r~ e I 1 1 e ~ I I : / 1 ~ e 1 1 e e 1: 1 a e e e 1: 1 ~ e e e ~ : 1 4' · e de. ~ 1:1 e e lli! ee ~ ~ 11: 1 lee ~ .1. e 11: 1 e. .1e . ICI t. ~ . Ir1 te e. . 1~1 ~e ~ Itl 1e · ~ ~ lll t ~ . ~ e lll ~ e e er . 1:11 C~te ~n a ~ Y C) · - - · - ~ - e_ C~ _ C~ O O O ~( ~C`~`e O O O O O O ~ 0 ~~ ~ w) 4/~ Spasds Ou!ueldo!ep/H Figure 13. Hydroplaning speed versus water film thickness. 65

Unfortunately, experimental test data needed to verify the prediction of water depths on the surface of porous asphalt pavement was not obtained during this study and such data are not available In the literature. In order to obtain reliable experimental data, very high rainfall rates are needed and the experimental section must be well isolated so that the entire flow is contained within the boundaries of the test sections. In simple terms, very high, uniform rainfall rates are needed on a "leak-proof" test section. These conditions could not be satisfied with the available equipment, neither In the laboratory nor In the Users. Capturing a natural event was considered but the idea was discarded because of the coordination effort and costs associated with capturing such an event. Therefore, it was not possible to validate equations 21 Trough 24 for porous asphalt surfaces. Rainfall Intensity The AASHTO highway design guides Include an equation for relating rainfall intensity, vehicle speed, and maximum allowable sight distance as follows: i - [80,000/(SV-Vi)] 147 where i -Rainfall intensity (in/h) sv Sight distance (ft) V; Vehicle velocity (mi/h) 66 (25) (1 in/in-25.4 mm/in) (1 ft _ 0.305 mm) (1 m~/h 1.61 l~n/h)

This relationship is depicted In figure 14. Although it appears In equation 25 that intensity is a function of sight distance, sight distance is a function of Intensity. As Intensity increases, sight distance decreases. Likewise, vehicle velocity decreases with increased intensity and decreasing sight distance. 67

- -- - V ehicIe speed = 60 knn/h - --V chicle speed = 80 krr`/h V chicle speed = 100 k m/h Vehicle speed = 120 krn/h ----Vehicle speed =160 k m/h 80 s ~ 60 - ~n 0 - - ce ._ ce 40 20 100 200 300 Sight distance Sv, m 400 500 Figure 14. Rainfall ~ntemit~r versus sight distance for various vehicle speeds. 68

Next: Chapter 4 Experimental Studies »
Improved Surface Drainage of Pavements: Final Report Get This Book
×
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF
  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  6. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  7. ×

    View our suggested citation for this chapter.

    « Back Next »
  8. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!