Input Guidelines for Motor Vehicle Emissions Simulator Model, Volume 2: Practitioners’ Handbook: Project Level Inputs (2015) / Chapter Skim
Currently Skimming:
Pages 13-16
The Chapter Skim interface presents what we've algorithmically identified as the most significant single chunk of text within every page in the chapter.
Select key terms on the right to highlight them within pages of the chapter.
From page 13... ...
3.0 Sensitivity of Model Outputs to Inputs The sensitivity of MOVES outputs to inputs can be characterized as the percent change in a pollutant output corresponding to a change in the input value across a range of conditions representative of the real world. This section provides a summary of sensitivity analyses conducted on the various MOVES inputs.
|
From page 14... ...
All of these sensitivity analyses were conducted using some version of MOVES2010. There may be minor differences in some impacts if the same analyses were conducted using MOVES2014, due to differences in embedded data in MOVES2014.
|
From page 15... ...
Table 3.2 Combined Sensitivity Analysis Results MOVES Input Source Base Case Comparison Made VOC NOx PM Fleet Inputs Age Distribution by Vehicle Class Volpe/FHWA 2010 National Default Age Distribution Move 10% of vehicles to Group 1 (0-10 years) ; Move 10% of vehicles to Group 2 (11-20 years)
|
From page 16... ...
Table 3.2 Combined Sensitivity Analysis Results (continued) MOVES Input Sourcea Base Case Comparison Made VOC NOx PM Project-Level Inputs (continued)
|
Key Terms
This material may be derived from roughly machine-read images, and so is provided only to facilitate research.
More
information on Chapter Skim is available.