Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
64 AASHTO, 2009. MP 18M/MP18-09 Standard Specification for Uncoated, Corrosion-Resistant, Deformed and Plain Alloy, Billet-Steel Bars for Concrete Reinforcement and Dowels, American Association of State Highway and Transportation Officials, Washington, D.C. AASHTO, 2007. LRFD Bridge Design Specifications, 4th edition and 2008â2009 interims, American Association of State Highway and Transportation Officials, Washington, D.C. AASHTO, 2004. LRFD Construction Specifications, 2nd edition and 2006â2008 revisions, American Association of State Highway and Transportation Officials, Washington, D.C. ACI Committee 224, 2001. ACI 224R-01 Control of Cracking in Concrete Structures, American Concrete Institute, Farmington Hills, MI, 46 pp. ACI Committee 318, 2008. ACI 318-08/ACI 318R-08 Building Code Requirements for Reinforced Concrete and Commentary, American Concrete Institute, Farmington Hills, MI. ACI Committee 363, 1992. ACI 363R-92 State of the Art Report on High Strength Concrete, American Concrete Institute, Farmington Hills, MI, 55 pp. ACI Committee 408, 2003. ACI 408R-03 Bond and Development of Straight Reinforcing Bars in Tension, American Concrete Institute, Farmington Hills, MI, 49 pp. AMEC Earth and Environmental, 2006. Comparative Performance of MMFX Microcomposite Reinforcing Steel and Other Types of Steel with Respect to Corrosion Resistance and Service Life Prediction in Reinforced Concrete Structures, AMEC, Burnaby, BC. Ahlborn, T. and DenHartigh, T., 2002. âA Comparative Bond Study of MMFX Reinforcing Steel in Concrete,â Michigan Tech Report CSD- 2002-03, July 2002. Ahmed, S.H. and Shah, S.P., 1982. âStress-Strain Curves of Concrete Confined by Spiral Reinforcement,â ACI Journal, Vol. 79, No. 6, pp 484â490. Al-Shaikh, A.H. and Al-Zaid, R.Z. 1993. âEffect of Reinforcement Ratio on the Effective Moment of Inertia of Reinforced Concrete Beams,â ACI Structural Journal, Vol. 90, No. 2, pp 144â149. Al-Zaid, R.Z., Al-Shaikh, A.H. and Abu-Hussein, M.M., 1991. âEffect of Loading Type on the Effective Moment of Inertia of Reinforced Con- crete Beams,â ACI Structural Journal, Vol. 88, No. 2, pp 184â190. ASTM, 2009. ASTM A615-09 Standard Specification for Deformed and Plain Carbon-Steel for Concrete Reinforcement, ASTM Interna- tional, Conshohocken, PA. ASTM, 2009. ASTM A706-09 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement, ASTM Inter- national, Conshohocken, PA. ASTM, 2009. ASTM A955-09 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement, ASTM Inter- national, Conshohocken, PA. ASTM, 2009. ASTM A1035-09 Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforce- ment, ASTM International, Conshohocken, PA. ASTM, 2009. ASTM E8-09 Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, Conshohocken, PA. ASTM, 2007. ASTM A82-07 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement, ASTM International, Conshohocken, PA. ASTM, 2007. ASTM A496-07 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement, ASTM International, Con- shohocken, PA. Barker, R.M. and Puckett, J.A., 2007. Design of Highway Bridges an LRFD Approach, 2nd edition, Wiley-Interscience, New York, 1010 pp. Beeby, A.W., 1983. âCracking, Cover and Corrosion of Reinforce- ment,â Concrete International: Design and Construction, Vol. 5, No. 2, pp 35â40. Bentz, E.C., 2000. Response 2000, http://www.ecf.utoronto.ca/â¼bentz/ home.shtml, accessed April 6, 2010. Birkeland, P.W., and H.W. Birkeland, 1966. âConnections in Precast Concrete Construction,â Journal of the American Concrete Institute, Vol. 63, No. 3, pp 345â368. Bischoff, P.H., 2005. âReevaluation of Deflection Prediction for Concrete Beams Reinforced with Steel and Fiber Reinforced Polymer Bars,â Journal of Structural Engineering, ASCE, May 2005, pp 752â767. Bischoff, P. and Paixao, R., 2004. âTension Stiffening and Cracking of Concrete Reinforced with GFRP Bars,â Canadian Journal of Civil Engineering, Vol. 31, No. 4, pp 579â588. Bjerkeli, L., Tomaszewicz, A., and Jensen, J.J., 1990. âDeformation Properties and Ductility of High-Strength Concrete,â ACI SP-121 - High Strength Concrete, pp 215â238. Branson, D.E., 1963. Instantaneous and Time-Dependent Deflections of Simple and Continuous Reinforced Concrete Beams, Research Report No. 7, Alabama Highway Department, Montgomery, AL, August 1963, 94 pp. Brown, V. and Bartholomew, C., 1996. âLong-Term Deflections of GFRP-Reinforced Concrete Beams.â Fiber Composites in Infrastruc- ture, Proc. of the First International Conference on Composites in Infra- structure. Tucson, AZ. Carey, S.A. and Harries, K.A., 2005. âAxial Behavior and Modeling of Small-, Medium- and Large-Scale Circular Sections Confined with CFRP Jackets,â ACI Structures Journal, Vol. 102, No. 4, pp 596â604. References
65 CEB-FIP, 1993. CEB-FIP Model Code (MC-90), Comité Euro- International du Béton (CEB), Thomas Telford Service Ltd., London, England. Ciancone, G.G., Michael, A.P., and Hamilton III, H.R., 2008. âBehav- ior of Standard Hook Anchorage with Corrosion Resistant Rein- forcement,â Technical Report FDOT No. BD 545-40, June 2008. Clemena and Virmani, 2004. âComparing the Chloride Resistances of Reinforcing Bars,â Concrete International, November 2004, pp 39â49. Comité Euro-International du Béton (CEB), 1990. CEB-FIP Model Code 1990: CEB Bulletin dâInformation 213â214, Thomas Telford Service Ltd., London, England. Corley, W.G., Hanson, J.M., and Helgason, T., 1978. âDesign of Reinforced Concrete for Fatigue,â Journal of the Structural Divi- sion, ASCE, Vol. 14, No. ST6, pp 921â932. Creazza, G. and Russo, S., 2001. âCrack Width Evaluation in FRP Reinforced Concrete Members,â Materials and Structures, Vol. 34, No. 2, pp 119â125. Cusson, D. and Paultre, P., 1994. âHigh-Strength Concrete Columns Confined with Rectangular Ties,â Journal of Structural Engineering, Vol. 120, No. 3, pp 783â804. Darwin, Browning, Nguyen, and Locke, 2002. âMechanical and Corro- sion Properties Testing of a High-Strength, High-Chromium Rein- forcing Steel for Concrete,â Report SD2001-05-F, South Dakota DOT. DeJong, S.J., and MacDougall, C., 2006. âFatigue Behaviour of MMFX Corrosion-Resistant Reinforcing Steel,â Proceedings of the 7th Inter- national Conference on Short and Medium Span Bridges, Montreal, Canada. DeJong, S.J., 2005. âFatigue of Corrosion Resistant Reinforcing Steels,â MS thesis, Queenâs University. de V Batchelor, B., Hewitt, B.E., and Csagoly, P.F., 1978. âInvestigation of the Fatigue Strength of Deck Slabs of Composite Steel/Concrete Bridges,â Transportation Research Record 644, Transportation Research Board, Washington, D.C. Dolan, C.W., 1989. âPrestressed Concrete Using Kevlar Reinforced Ten- dons,â PhD thesis, Cornell University. El-Hacha, R., El-Agroudy, H., and Rizkalla, S., 2006. âBond Characteris- tics of High-Strength Steel Reinforcement,â ACI Structural Journal, Vol. 103, No. 6, Nov-Dec 2006, pp 771â782. El-Hacha, R. and Rizkalla, S., 2002. âFundamental Material Properties of MMFX Steel Rebars,â Research Report: RD-02/04, North Car- olina State University, July 2002, 62 pp. Fang, K.I., 1985. âBehavior of Ontario-Type Bridge Decks on Steel Gird- ers,â PhD dissertation, University of Texas at Austin. Fikry, A.M. and Thomas, C., 1998. âDevelopment of a Model for the Effec- tive Moment of Inertia of One-Way Reinforced Concrete Elements,â ACI Structural Journal, Vol. 95, No. 4, pp 444â455. Florida DOT, 2002. Investigation into the Structural Performance of MMFX Reinforcing Bars. Frosch, R.J., 1999. âAnother Look at Cracking and Crack Control in Rein- forced Concrete,â ACI Structural Journal, Vol. 96, No. 3, pp 437â442. Frosch, R.J., 2001. âFlexural Crack Control in Reinforced Concrete,â ACI SP204: Design and Construction Practices to Mitigate Cracking, Amer- ican Concrete Institute, pp 135â154. Gao, D., Benmokrane, B., and Masmoudi, R., 1998. A Calculating Method of Flexural Properties of FRP-Reinforced Concrete Beam: Part 1: Crack Width and Deflection, University of Sherbrooke, Quebec, Canada. Gergely, P. and Lutz, L.A., 1968. âMaximum Crack Width in Reinforced Concrete Flexural Members,â ACI SP20: Causes, Mechanism, and Control of Cracking in Concrete, American Concrete Institute, pp 87â117. Ghali, A., 1993. âDeflection of Reinforced Concrete Members: A Criti- cal Review,â ACI Structural Journal, Vol. 90, No. 4, pp 364â373. Gilbert, R.I., 1999. âFlexural Crack Control for Concrete Beams and Slabs: An Evaluation of Design Procedures,â Proceedings of the 16th Australasian Conference on the Mechanics of Structures and Materials, Sydney, Australia, pp 175â180. Gilbert, R.I., 2006. âDiscussion of âRe-Evaluation of Deflection Predic- tion for Concrete Beams Reinforced with Steel and FRP Barsâ by Peter H. Bischoff,â Journal of Structural Engineering, ASCE, Vol. 132, No. 8, pp 1328â1330. Grossman, J.S., 1981. âSimplified Computations for Effective Moment of Inertia Ie and Minimum Thickness to Avoid Deflection Compu- tations,â ACI Journal, Vol. 78, No. 6, pp 423â439. Halvorsen, G.T., 1987. âCode Requirements for Crack Control,â ACI SP-104: Concrete and Concrete Construction, Farmington Hills, MI, pp 275â322. Hanson, N.W., 1960. âPrecast-Prestressed Concrete Bridges: Horizon- tal Shear Connections,â Journal PCA Research and Development Laboratories, Vol. 2, No. 2, pp 38â58. Harries, K.A., Zorn, A., Aidoo, J., and Quattlebaum, J., 2006. âDeterio- ration of FRP-to-Concrete Bond Under Fatigue Loading,â Advances in Structural Engineering, Special Issue on Bond Behaviour of FRP in Structures, Vol. 9, No. 6, pp 779â789. Hartt, Powers, Leroux, and Lysogorski, 2004. âA Critical Literature Review of High-Performance Corrosion Reinforcements in Con- crete Bridge Applications,â FHWA-HRT Report 04-093. Hassan, T.K., Seliem, H.M., Dwairi, H., Rizkalla, S.H., and Zia, P., 2008. âShear Behavior of Large Concrete Beams Reinforced with High-Strength Steel,â ACI Structural Journal, Vol. 105, No. 2, pp 173â179. Helgason, T., Hanson, J.M., Somes, N.F., Corley, W.G., and Hognestad, E., 1976. NCHRP Report 164: Fatigue Strength of High-Yield Rein- forcing Bars, Transportation Research Board, Washington, D.C. Hill, C., Chiaw, C.C., and Harik, I.E., 2003. âReinforcement Alternatives for Concrete Bridge Decks,â Report KTC-03-19/SPR-215-00-1F, July 2003. Holowka, M., Dorton, R.A., and Csagoly, P.F., 1980. Punching Shear Strength of Restrained Circular Slabs, Ontario Ministry of Trans- portation. Imbsen Software Systems, 2007. XTRACT V3.0.8, http://www.imbsen. com/xtract.htm, accessed November 11, 2007. Kahn, L.F. and Mitchell, A.D., 2002. âShear Friction Tests with High Strength Concrete,â ACI Structural Journal, Vol. 99, No. 1, pp 98â103. Khader, A., 2002. âEvaluation of MMFX Corrosion-Resistant Steel Dowel Bars in Concrete Pavements,â Report WI-07-03, Wisconsin DOT. Kokubu, M. and Okamura, H., 1965. Fundamental Study on Fatigue Behavior of Reinforced Concrete Beams Using High Strength Deformed Bars, Japan Society of Civil Engineers (Tokyo), No. 122, Oct 1965, pp lâ28. Kuchma, D.A., Kim, K.S., Kim, S.H., Sun, S., and Hawkins, N.M., 2005. âNCHRP Project 12-61: Simplified Shear Design of Structural Con- crete Members,â Proceedings of the 6th International Bridge Engineer- ing Conference, July 17â20, 2005. Transportation Research Record CD 11-S, Washington, D.C., pp 129â142. Lash, S.D., 1969. âCan High-Strength Reinforcement be Used for High- way Bridges?â ACI SP23: First International Symposium on Concrete Bridge Design, American Concrete Institute, pp 283â299. Loov, R.E. and Patnaik, A.K., 1994. âHorizontal Shear Strength of Com- posite Concrete Beams with a Rough Interface,â PCI Journal, Vol. 39, No. 1, pp 48â69.
66 MacGregor, J.G., Jhamb, I.C., and Nuttall, N., 1971. âFatigue Strength of Hot-Rolled Reinforcing Bars,â ACI Journal Proceedings, Ameri- can Concrete Institute, Vol. 68, No. 3, pp 169â179. Mander, J.B., Priestley, M.J.N., and Park, R., 1988. âObserved Stress- Strain Behavior of Confined Concrete,â Journal of Structural Engi- neering, ASCE, Vol. 114, No. 8, pp 1827â1849. Malhas, F.A., 2002. Preliminary Experimental Investigation of the Flexural Behavior of Reinforced Concrete Beams Using MMFX Steel, University of North Florida, July 2002. Mallet, O., 1991. Fatigue of Reinforced Concrete, HMSO, London. Mancio, Carlos, Zhang, Harvey, and Monteiro, 2007. Laboratory Evalu- ation of Corrosion Resistance of Steel Dowels in Concrete Pavements, report to Caltrans. Martinez, S., Nilson, A.H., and Slate, F.O., 1982. Spirally Reinforced High Strength Concrete Columns, Cornell University Department of Struc- tural Engineering Research Report No. 82-10, 255 pp. Masmoudi, R., Thériault, M., and Benmokrane, B., 1998. âFlexural Behavior of Concrete Beams Reinforced with Deformed Fiber Rein- forced Plastic Reinforcing Rods,â ACI Structural Journal, Vol. 95, No. 6, pp 665â676. Mast, R.F., 1992. âUnified Design Provisions for Reinforced and Pre- stressed Concrete Flexural and Compression Members,â ACI Struc- tural Journal, Vol. 89, No. 2, March-April 1992, pp 185â199. Mast, R.F., 2006. Personal Correspondence. Mast, R.F., Dawood, M., Rizkalla, S.M. and Zia, P., 2008. âFlexural Strength Design of Concrete Beams Reinforced with High- Strength Steel Bars,â ACI Structural Journal, Vol. 105, No. 4, pp 570â577. McNally, M.M., 2003. âMMFX Rebar Evaluation for I-95 Service Road Bridge 1-712-B,â MS thesis, University of Delaware. Michael, A., 2004. Tensile Testing of Mechanical Bar Splices for MMFX Steel, Florida DOT, February 2004. Moss, D.S., 1980. âAxial Fatigue of High Yield Reinforcing Bars in Air,â Transport and Road Research Laboratory Report SR622. Moss, D.S., 1982. âBending Fatigue of High-Yield Reinforcing Bars in Concrete,â TRRL Supplementary Rep. 748, Transport and Road Research Laboratory, Crowthome, UK. Muguruma, H., Nishiyama, M., Watanabe, F., and Tanaka, H., 1991. âDuctile Behavior of High Strength Concrete Columns Confined by High Strength Transverse Reinforcement,â ACI SP-128 - Evaluation and Rehabilitation of Concrete Structures and Innovations in Design, pp 877â891. Muguruma, H. and Watanabe, F., 1990. âDuctility Improvement of High Strength Concrete Columns with Lateral Confinement,â ACI SP-121 - High Strength Concrete, pp 47â60. Murashev, V.I., 1940. Theory of Appearance and Opening of Cracks, Com- putation of Rigidity of Reinforced Concrete Members, Stroitelnaya Promishlenost, Moscow, Vol. 11. Nagashima, T., Sugano, S., Kimura, H., and Ichikawa, A., 1992. âMonot- onic Axial Compression Test on Ultrahigh Strength Concrete Tied Columns,â Proceedings of the Tenth World Conference on Earthquake Engineering, Madrid, pp 2983â2988. Nawy, E.G., 1968. âCrack Control in Reinforced Concrete Structures,â Journal of the American Concrete Institute, Farmington Hills, MI, Vol. 65, October 1968, pp 825â838. Nawy, E.G. and Neuwerth, G.E., 1977. âFiberglass Reinforced Concrete Slabs and Beams,â ASCE Journal of the Structural Division, Vol. 103, No. 2, pp 421â440. Neville, A.M., 1975. Properties of Concrete, 2nd edition, Pitman. Nishiyama, M., Fukushima, I., Watanabe, F., and Muguruma, H., 1993. âAxial Loading Tests on High Strength Concrete Prisms Confined by Ordinary and High Strength Steel,â Proceedings of the Symposium on High Strength Concrete, Norway, pp 322â329. Ospina, C.E. and Bakis, C.E., 2007. âIndirect Flexural Crack Control of Concrete Beams and One-Way Slabs Reinforced with FRP Bars,â Proceedings of FRPRCS-8, Patras, Greece, July 2007. PCI Industry Handbook Committee, 2004. PCI Design Handbook, Pre- cast/Prestressed Concrete Institute, Chicago, IL, pp 2â42. Pessiki, S., Graybeal, B. and Mudlock, M., 2002. âDesign of High Strength Spiral Reinforcement in Concrete Compression Mem- bers,â Proceedings of the International Conference on Advances in Building Technology, Hong Kong, December 2002, pp 431â438. Pessiki, S., Graybeal, B., and Mudlock, M., 2001. âProposed Design of High Strength Spiral Reinforcement in Compression Members,â ACI Structural Journal, Vol. 98, No. 6, Nov-Dec 2001, pp 799â810. Pessiki, S.P. and Graybeal, B.A., 2000. âAxial Load Tests of Concrete Compression Members with High Strength Spiral Reinforcement,â PCI Journal, Vol. 45, No. 2, pp 64â80. Peterfreund, P., 2003. âDevelopment Length of MMFX Steel Reinforc- ing Bars Used in Bridge Deck Applications,â MSc thesis, University of Massachusetts-Amherst. Pfister, J.F. and Hognestad, E., 1964. âHigh Strength Bars as Concrete Reinforcement: Fatigue Tests,â Journal PCA Research and Develop- ment Laboratories, Vol. 6, No. 1, pp 65â84. Polat, M.B., 1992. âBehavior of Normal and High Strength Concrete under Axial Compression,â MASc thesis, University of Toronto, 175 pp. Poursaee, A., Geiker, M.R., Hansen, K.K., Peled, A., and Weiss, W.J., 2010. âX-Ray Absorption Measurements of Fluid Ingress in Cracked Concrete Under Load,â presentation made at ACI Spring Conven- tion, March 22, 2010, Chicago, IL. Priestley, N.J.M., Seibel, F., and Calvi, G.M., 1996. Seismic Design and Retrofit of Bridges, Wiley, 686 pp. Ramberg, W. and Osgood, W.R., 1943. Description of Stress-Strain Curves by Three Parameters, National Advisory Committee on Aeronautics, TN. Ramirez, J.A. and Russell, B.W., 2008. NCHRP Report 603: Transfer, Devel- opment, and Splice Length for Strand/Reinforcement in High-Strength Concrete, Transportation Research Board, Washington, D.C. Rangan, B.V., 1982. âControl of Beam Deflections by Allowable Span-Depth Ratios,â ACI Journal Proceedings, Vol. 79, No. 5, pp. 372â377. Rao, P.S., 1966. Die Grundlagen zur Berechnung der bei Statisch Unbes- timmten Stahlbetonkonstruktionen im Plastischen Bereich Auftretenden Umlagerungen der Schnittkräfte (Basic laws governing moment redis- tribution in statically indeterminate reinforced concrete structures) DAfStb, Ernst & Sohn, Berlin, Heft 177. Rasheed, H.A., Nayal, R., and Melhem, H., 2004. âResponse Prediction of Concrete Beams Reinforced with FRP Bars,â Composite Structures, Vol. 65, No. 2, pp 193â204. Razaqpur, A.G., Svecova, D., and Cheung, M.S., 2000. âRational Method for Calculating Deflection of Fiber-Reinforced Polymer Reinforced Beams,â ACI Structural Journal, Vol. 97, No. 1, pp 175â185. Razvi, S.R. and Saatcioglu, M., 2002. âDisplacement Based Design of Reinforced Concrete Columns for Confinement,â ACI Structural Journal, Vol. 90, No. 1, pp 3â11. Razvi, S.R. and Saatcioglu, M., 1999. âStress-Strain Relationship for Con- fined High-Strength Concrete,â Journal of Structural Engineering, ASCE, Vol. 125, No. 3, pp 281â289. Razvi, S.R. and Saatcioglu, M., 1994. âStrength and Deformability of High Strength Concrete Columns,â ACI Structural Journal, Vol. 91, No. 6, pp 678â687 and Appendix.
67 Razvi, S.R. and Saatcioglu, M., 1992. âStrength and Ductility of Con- fined Concrete,â Journal of Structural Engineering, ASCE, Vol. 118, No. 6, pp 1590â1607. Restrepo, J.I., Seible, F., Stephan, B., and Schoettler, M.J., 2006. âSeismic Testing of Bridge Columns Incorporating High-Performance Mate- rials,â ACI Structural Journal, Vol. 103, No. 4, July-August 2006, pp 496â504. Richart, F.E. and Brown, R.L., 1934. âAn Investigation of Reinforced Concrete Columns,â University of Illinois Bulletin, Vol. XXXI, No. 40. Richart, F.E., Brandtzaeg, A., and Brown, R.L., 1928. âA Study of the Fail- ure of Concrete under Combined Compressive Stresses,â University of Illinois Bulletin, Vol. XXVI, No. 12, 104 pp. Rizkalla, S., Mirmiran, A., Zia, P., Russell, H., and Mast, R., 2007. NCHRP Report 595: Application of the LRFD Bridge Design Specification to High-Strength Structural Concrete: Flexure and Compression Provi- sions, Transportation Research Board, Washington, D.C. Rizkalla, S., Zia, P., Seliem, H., and Lucier, G., 2005. âEvaluation of MMFX Steel for NCDOT Concrete Bridges,â Report FHWA/ NC/2006-31, NCDOT Project 2004-27, December 2005. Scanlon, A., Cagley Orsak, D.R., and Buettner, D.R., 2001. ACI Code Requirements for Deflection Control in Concrete Structures. Edited by E.G. Nawy and A. Scanlon. American Concrete Institute, Farming- ton Hills, MI, SP-203, pp 1â14. Scanlon, A. and Bischoff, P.H., 2008. âShrinkage Restraint and Loading History Effects on Deflection of Flexural Members,â ACI Structural Journal, Vol. 106, No. 4, pp 498â506. Seliem, H.M., Hosny, A., Rizkalla, S., Zia, P., Briggs, M., Miller, S., Darwin, D., Browning, J., Glass, G.M., Hoyt, K., Donnelly, K., and Jirsa, J.O., 2009. âBond Characteristics of ASTM A1035 Steel Reinforcing Bars,â ACI Structural Journal, Vol. 106, No. 4, pp 530â539. Seliem, H., Hosny, A., Dwairi, H., and Rizkalla, S., 2006. âShear Behavior of Concrete Beams Reinforced with MMFX Steel Without Web Reinforcement,â NC State Report IS-06-08, April 2006. Shahrooz, B.M., 2010. Analysis and Design of Flexural Members, Univer- sity of Cincinnati, accessed Jan. 17, 2010. Smith Emery Laboratories, 2006. Static Compression Tests on MMFX Coupled Reinforcing Steel Bars. Soltani, A., 2010. âBond and Serviceability Characterization of Concrete Reinforced with High Strength Steel,â PhD thesis, University of Pitts- burgh. Springstone, 2004. âModular Pier for Naval Ports,â Proceedings of the ASCE Ports 2004 Conference. Stephan, B., Restrepo, J., and Seible, F., 2003. âSeismic Behavior of Bridge Columns Built Incorporating MMFX Steel,â UCSD Report SSRP- 2003/09. Sumpter, M.S., 2007. âBehavior of High Performance Steel as Shear Rein- forcement for Concrete Beams,â ACI Structural Journal, Vol. 106, No. 2, pp 171â177. Thériault, M. and Benmokrane, B., 1998. âEffects of FRP Reinforcement Ratio and Concrete Strength on Flexural Behavior of Concrete Beams,â ASCE Journal of Composites for Construction, Vol. 2, No. 1, pp 7â16. Tilly, G.P. and Moss, D.S., 1982. âLong Endurance Fatigue of Steel Reinforcement,â Proc., ABSE Coll., Lausanne, Switzerland. Toutanji, H.A. and Saafi, M., 2000. âFlexural Behavior of Concrete Beams Reinforced with Glass Fiber-Reinforced Polymer (GFRP) Bars,â ACI Structural Journal, Vol. 97, No. 5, pp 712â719. Trejo and Pillai, 2004. âAccelerated Chloride Threshold Testing â Part II: Corrosion Resistant Reinforcement,â ACI Materials Journal, Vol. 101, No. 1, pp 57â64. Trinnea, 2006. âCorrosion Resistant Reinforcement, ASM Handbook, Volume 13C, Corrosion: Environments and Industries. Vecchio, F.J. and Collins, M.P., 1986. The Modified Compression-Field Theory for Reinforced-Concrete Elements Subjected to Shear, Amer- ican Concrete Institute, Vol. 83 No. 2, pp 219â231. Vijay, P.V., GangaRao, H.V.S., and Prachasaree, W., 2002. Bending Behavior of Concrete Beams Reinforced with MMFX Steel Bars, West Virginia University, July 2002. Viwathanatepa, S., Popov, E.P., and Bertero, V.V., 1979. âEffects of Generalized Loadings on Bond of Reinforcing Bars Embedded in Confined Concrete Blocks,â UCB/EERC-79/22, University of Cali- forniaâBerkeley, Earthquake Engineering Research Center. Walraven, J.C. and Reinhardt, H.W., 1981. âTheory and Experiments on the Mechanical Behavior of Cracks in Plain and Reinforced Concrete Subjected to Shear Loading,â Heron, Vol. 26. Ward, E.L., 2009. âAnalytical Evaluation of Structural Concrete Members with High-Strength Steel Reinforcement,â MS thesis, University of Cincinnati. Wascheidt, H., 1965. âOn the Fatigue Strength of Embedded Concrete Reinforcing Steel (Zur Frage der Dauerschwingfestigkeit von Beton- stahlen im einbetonierten Zustand),â doctoral thesis, Technical Uni- versity of Aachen. Wight, J.K. and MacGregor, J.G., 2009. Reinforced Concrete: Mechanics and Design, 5th Edition, Prentice-Hall, pp 52â56. Wipf, Phares, Fanous, Lee, and Jolley, 2005. Evaluation of Corrosion Resis- tance of Different Steel Reinforcement Types, Iowa State University CTRE report. Wiss, Janney, Elstner Associates, Inc., 2006. Corrosion Resistance of Alter- native Reinforcing Bars: An Accelerated Test Report Prepared for CRSI. Yong, Y.K., Nour, M.G., and Nawy, E.G., 1988. âBehavior of Laterally Confined High-Strength Concrete Axial Loads,â ASCE Journal of Structural Engineering, Vol. 114, No. 2, pp 332â351. Yost, J.R., Gross, S.P., and Dinehart, D.W., 2003. âEffective Moment of Inertia for Glass Fiber-Reinforced Polymer-Reinforced Concrete Beams,â ACI Structural Journal, Vol. 100, No. 6, pp 732â739. Zeno, G.A., 2009. âUse of High Strength Steel Reinforcement in Shear Friction Applications,â MSCE thesis, University of Pittsburgh, 91 pp.