Simple Performance Tester for Superpave Mix Design: First-Article Development and Evaluation (2003)

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

54 REFERENCES 1. Witczak, M.W., Kaloush, K., Pellinen, T., El-Basyouny, M., and Von Quintus, H., “Simple Performance Test for Superpave Mix Design,” NCHRP Report 465, Transportation Research Board, Washington, D.C., 2002. 2. Monismith, C.L., Hicks, G.R., and Finn, F.N., “Accelerated Load Tests for Asphalt Aggregate Mixtures and Their Role in AAMAS,” Journal of the Association of Asphalt Paving Tech- nologists, Volume 60, 1991, pp. 586–631. 3. Roberts, F.L., Kandahl, P.S., Brown, E.R., Lee, D.Y., and Kennedy, T.W., Hot Mix Asphalt Materials, Mixture Design, and Construction, NAPA Research and Education Foundation, Lanham, MD, 1996, pp. 301–304. 4. AASHTO Designation T 67-00 and ASTM E-4 98a, “Standard Practice for Force Verification of Testing Machines, “ Standard Specifications for Transportation Materials and Methods of Sam- pling and Testing, Part 2A Tests, American Association of State Highway and Transportation Officials, Washington, D.C., 2002. 5. NCHRP Project 9-19 June 2001 Quarterly Progress Report. 6. AASHTO Designation T 231-97, “Standard Method of Test for Capping Cylindrical Concrete Specimens, “ Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Part 2B Tests, American Association of State Highway and Transportation Officials, Washington, D.C., 2002. 7. Witczak, M.W., Bonaquist, R., Von Quintus, H., and Kaloush, K., “Specimen Geometry and Aggregate Size Effects in Uni- axial Compression and Constant Height Shear Tests,” Journal of the Association of Asphalt Paving Technologists, Volume 69, 2000, pp. 733–793. 8. ASTM D 6027, Standard Test Method for Linear Displacement Transducers for Geotechnical Purposes, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA. 9. ASTM D 5720, Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA. 10. Cominsky, R., Huber, G., Kennedy, T., and Anderson, M., The Superpave Mix Design Manual for New Constructions and Overlays. Report SHRP-A-407, Strategic Highway Research Program, National Research Council, National Academy of Sciences, Washington, DC. 11. Chapra and Canale in Numerical Methods for Engineers (McGraw-Hill, 1985, pp. 404–407) 12. Alavi, S., Merport, T., Wilson, T., and Lopez, A., LTPP Mate- rials Characterization Program: Resilient Modulus of Unbound Materials (LTPP Protocol P46) Laboratory Startup and Quality Control Procedures, Report Number FHWA-RD-96-176, Fed- eral Highway Administration, January, 1997. 13. Christensen, D.W., Thomas, H.R., Field Shear Shear Test for Hot-Mix Asphalt, NCHRP Project 9-18 Final Report, October, 2001. 14. Neter, J., Wasserman, W., and Kutner, M, H., Applied Linear Statistical Models, 2nd Ed. (Homewood, IL: Richard D. Irwin, Inc., 1985), 1,127 pp. 15. Witczak, M.W., Bonaquist, R., Von Quintus, H., and Kaloush, K., “Specimen Geometry and Aggregate Size Effects in Uni- axial Compression and Constant Height Shear Tests,” Journal of the Association of Asphalt Paving Technologists, Volume 69, 2000, pp. 733–793. 16. Pellinen, T.K., Investigation of the Use of Dynamic Modulus as an Indicator of Hot-Mix Asphalt Performance, Ph.D. Dis- sertation, Arizona State University, May, 2001. 17. Kaloush, K.E., Simple Performance Test for Permanent Defor- mation of Asphalt Mixtures, Ph.D. Dissertation, Arizona State University, May, 2001.