National Academies Press: OpenBook
« Previous: List of Tables
Page 7
Suggested Citation:"Acknowledgments." National Academies of Sciences, Engineering, and Medicine. 2005. Precision Estimates for AASHTO Test Method T308 and the Test Methods for Performance-Graded Asphalt Binder in AASHTO Specification M320. Washington, DC: The National Academies Press. doi: 10.17226/21969.
×
Page 7

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

ACKNOWLEDGMENTS The research reported herein was performed under NCHRP Project 9-26 by the AASHTO Materials Reference Laboratory (AMRL). Mr. Ron Holsinger was the principle investigator on the study, Mr. Pete Spellerberg served as the co-principal investigator, and Dr. Charles Antle was the consultant on the statistical analysis procedure. Mr. Adam Fisher and other AMRL staff members assisted with various phases of the project. Special thanks are extended to the laboratories participating in the AMRL Proficiency Sample Programs used in this study. vii

Next: Chaper 1: Introduction and Research Approach »
Precision Estimates for AASHTO Test Method T308 and the Test Methods for Performance-Graded Asphalt Binder in AASHTO Specification M320 Get This Book
×
 Precision Estimates for AASHTO Test Method T308 and the Test Methods for Performance-Graded Asphalt Binder in AASHTO Specification M320
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

TRB’s National Cooperative Highway Research Program (NCHRP) Web Document 71: Precision Estimates for AASHTO Test Method T308 and the Test Methods for Performance-Graded Asphalt Binder in AASHTO Specification M320 includes the results of Phase 3 of NCHRP 9-26, in which data from the AMRL Proficiency Sample Program (PSP) are used to create or update precision estimates for a variety of test methods. These include those methods specified in AASHTO Standard Specification M320, “Performance-Graded Asphalt Binder,” and AASHTO Standard Test Method T308, “Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method.” The report from Phase 1 of Project 9-26, which was published as NCHRP Web Document 54, includes precision estimates of selected volumetric properties of HMA using non-absorptive aggregates. The report from Phase 2, which was published as NCHRP Web Document 66, discusses the results of an investigation into the cause of variations in HMA bulk specific gravity test results using non-absorptive aggregates.

READ FREE ONLINE

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  6. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  7. ×

    View our suggested citation for this chapter.

    « Back Next »
  8. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!