Non-Nuclear Methods for Compaction Control of Unbound Materials (2014)

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

115 rEFErENCES Abu-Farsakh, M.Y., K. Alshibli, M. Nazzal, and E. Seyman, Assessment of In situ Test Technology for Construction Control of Base Courses and Embankments, Final Report, Louisiana Department of Transportation/FHWA Report No. 736-02-0995, 2004. Abu-Farsakh, M.Y., M.D. Nazzal, K. Alshibli, and E. Seyman, “Part 2: Soil Parameters for Pavement Design and Sub- grade Resilient Modulus: Application of Dynamic Cone Penetrometer in Pavement Construction Control,” Trans- portation Research Record: Journal of the Transportation Research Board, Vol. 1913, No. 1, 2005, pp. 52–61. Adam, D. and F. Kopf, Meßßtechnische und theoretische Untersuchungen als Grundlage für die Weiterentwicklung und normative Anwendung der dynamischen Lastplatte, Report No. 68, Lecture: Fairs in the Geotechnik 2002, Braun schweig, Technical University of Braun schweig, Germany, Feb. 21–22, 2002 (in German). Aguirre, M.L.M., Correlación entre las pruebas estáticas y dinámicas de compactación de suelos en el laboratorio, MS Thesis, National University of México, 1964. Aiban, S.A. and V. Aurifullah, “Effect of Gravel Size, Type, and Mold Size on the Carrying Capacity of Calcareous Fines-Gravel Mixes,” Journal of Materials in Civil Engi- neering, Vol. 19, No. 10, 2007, pp. 834–847. Al-Amoudi, O.S.B., M.I. Asi, H.I. Al-Abdul Wahhab, and Z.A. Khan, “Clegg Hammer California Bearing Ratio,” Journal of Materials in Civil Engineering, Vol. 14, No. 6, pp. 512–523, 2002. Alleman, J.E., P.J. Fox, and D.J. De Battista, Performance Evaluation of Highway Embankment Constructed Using Coal Ash, Final Report for Indiana Department of Transportation, Joint Transportation Research Program, Paper 163, 1996 [Online]. Available: http://docs.lib.purdue. edu/jtrp/163. American Association of State Highway and Transporta- tion Officials (AASHTO), Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop, AASHTO, Wash- ington, D.C., 1999. American Society for Testing and Materials (ASTM), Standard Test Method for Laboratory Compaction Characteristics of Soils Using Standard Effort, Annual Book of ASTM Stan- dards, ASTM D698, ASTM, West Conshohocken, Pa., 2000. American Society for Testing and Materials (ASTM), Stan- dard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods, Annual Book of ASTM Standards, ASTM D6938, ASTM, West Conshohocken, Pa., 2000. American Society for Testing and Materials (ASTM), Standard Test Method for Determination of the Impact Value (IV) of a Soil, Annual Book of ASTM Standards, ASTM D5874, ASTM, West Conshohocken, Pa., 2007. American Society for Testing and Materials (ASTM), Stan- dard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating, Annual Book of ASTM Standards, ASTM D4643, ASTM, West Conshohocken, Pa., 2008. American Society for Testing and Materials (ASTM), Stan- dard Test Methods for Laboratory Compaction Charac- teristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3), ASTM D1557, ASTM, West Con- shohocken, Pa., 2009. American Society for Testing and Materials (ASTM), Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications, Annual Book of ASTM Standards, ASTM D6951, ASTM, West Conshohocken, Pa., 2009. American Society for Testing and Materials (ASTM), Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD), Annual Book of ASTM Standards, ASTM E2583, ASTM, West Conshohocken, Pa., 2011. American Society for Testing and Materials (ASTM), Stan- dard Test Method for Measuring Deflections Using a Porta- ble Impulse Plate Load Test Device, Annual Book of ASTM Standards, ASTM E2835, ASTM, West Conshohocken, Pa., 2011. American Society for Testing and Materials (ASTM), Stan- dard Test Method for Field Determination of Water (Mois- ture) Content of Soil by the Calcium Carbide Gas Pressure Tester, Annual Book of ASTM Standards, ASTM D4944, ASTM, West Conshohocken, Pa., 2011. Basheer, I.A., “Empirical modeling of the compaction curve of cohesive soils,” Canadian Geotechnical Journal, Vol. 38, No. 1, 2001, 29–45. Bell, J.R., “Compaction Energy Relationship of Cohesive Soils,” Transportation Research Record No. 641, Transpor- tation Research Board, National Research Council, Wash- ington, D.C., 1977, pp. 29–34. Berney, E.S., M. Mejías, and J.D. Kyzar, Non-nuclear alter- natives to monitoring moisture-density response in soils. US Army Engineer Research and Development Center, Geotechnical and Structures Lab., Vicksburg, Miss., 2013. Berney, I.V., S. Ernest, J.D. Kyzar, and L.O. Oyelami, Device Comparison for Determining Field Soil Moisture Content, No. ERDC/GSL-TR-11-42, Engineer Research and Devel- opment Center, Geotechnical and Structures Lab., Vicks- burg, Miss., 2011. Bloomquist, D.B., R.D. Ellis, and B. Birgisson, Development of Compaction Quality Control Guidelines That Account for Variability in Pavement Embankments in Florida, Uni- versity of Florida, Gainesville, 2003. Brandl, H., D. Adam, F. Kopf, and R. Niederbrucker, Der dynamische lastplattenversuch mit dem leichten fallgewischtesgerät, Bundesministerium für Verkehr:

116 Innovation und Technologie, Straßenforschung, Heft 528, Wien, 2003. Briaud, J.L. and K.Y. Rhee, The BCD: A New Instrumenta- tion for Compaction Control, Final Report for IDEA Proj- ect 118, Transportation Research Board of the National Academies, Washington, D.C., 2009. Brown, J., “Non-nuclear Compaction Gauge Comparison Study,” VTrans 2007-19, Vermont Agency of Transporta- tion, Montpelier, 2007. Burmister, D.M., “The Importance of Practical Use of Relative Density in Soil Mechanics,” Proceedings of the American Society of Testing Materials, Vol. 48, 1948, pp. 1249–1251. Burnham, T.R., Application of the Dynamic Cone Penetrom- eter to Minnesota, Report No. MN/RC 97-19, Department of Transportation Pavement Assessment Procedures, Minnesota Department of Transportation, St. Paul, 1993. Camargo, F., B. Larsen, B. Chadbourn, R. Roberson, and J. Siekmeier, “Intelligent Compaction: A Minnesota Case History,” In 54th Annual University of Minnesota Geotech- nical Conference, Feb. 2006. Cardenas, R., Soil Compaction Meter Verification Testing- Summary Report, prepared for Gas Research Institute by Foster-Miller, Inc., Waltham, Mass., 2000. Chaddock, B.C.J. and A.J. Brown, “In situ Tests for Road Foundation Assessment,” Proceedings of the Fourth Inter- national Symposium on Unbound Aggregates in Roads (unbar4), July 17–19, 1995, University of Nottingham, U.K. Chai, G. and N. Roslie, “The Structural Response and Behavior Prediction of Subgrade Soils Using Falling Weight Deflec- tometer in Pavement Construction,” Third Inter national Conference on Road and Airfield Pavement Technology, Apr. 1998. Chang, G., Q. Xu, J. Rutledge, B. Horan, L. Michael, D. White, and P. Vennapusa, Accelerated Implementation of Intelligent Compaction Technology for Embankment 26 Subgrade Soils, Aggregate Base, and Asphalt Pavement Materials, Federal Highway Administration, Washington, D.C., 2011. Chen, D.H., J.N. Wang, and J. Bilyeu, “Application of Dynamic Cone Penetrometer in Evaluation of Base and Subgrade Lay- ers,” Transportation Research Record No. 1764, Transporta- tion Research Board, National Research Council, Washington, D.C., 2001. Chen, D.H., D.F. Lin, P.H. Liau, and J. Bilyeu, “A Corre- lation Between Dynamic Cone Penetrometer Values and Pavement Layer Moduli,” Geotechnical Testing Journal, Vol. 28, No. 1, Jan. 2007, pp. 42–49. Chen, J., M. Hossain, and T.M. LaTorella, “Use of Falling Weight Deflectometer and Dynamic Cone Penetrom- eter in Pavement Evaluation,” Transportation Research Record No. 1655, Transportation Research Board, National Research Council, Washington, D.C., 1999, pp. 145–151. Chen, T.C., R.H. Chen, and S.S. Lin, “Nonlinear Homog- enized Model Applicable to Reinforced Soil Analysis,” Geotextiles and Geomembranes, Vol. 18, No. 6, 2000, pp. 349–366. Cho, Y., K. Kabassi, Z. Zhuang, H. Im, C. Wang, T. Bode, and Y. Kim, Non-nuclear Method for Density Measurements, Report No. SPR1 (10) P335. Nebraska Transportation Cen- ter, Lincoln, 2011. Clegg, B., “An Impact Soil Test as Alternative to Califor- nia Bearing Ratio,” 3rd ANZ Geomechanics Conference, Wellington, New Zealand, Vol. 1, 1980, pp. 225–230. Clegg, B., “Application of an Impact Test to Field Evaluation of Marginal Base Course Material,” Proceedings of the 3rd International Conference on Low Volume Roads, Ari- zona, Transportation Research Record 898, Transportation Research Board, National Research Council, Washington D.C., 1983. Clegg, B., “Correlation with California Bearing Ratio,” Clegg Impact Soil Tester Newsletter, July 1986. Clegg, B., Technical Note 1—Calculation of Penetration and Elastic Modulus from CIV, 1994. Converse, F.J., Compaction of Cohesive Soil by Low-frequency Compaction, ASTM Special Publication No. 206, ASTM, West Conshohocken, Pa., 1956, pp. 75–82. Coyle, H.M. and E.C. West, Laboratory Compaction of a Silty Clay to Simulate Field Density Curves, MS Thesis, Massachusetts Institute of Technology, Cambridge, 1956. Dai, S. and C. Kremer, Improvement and Validation of Mn/DOT DCP Specifications for Aggregate Base Materi als and Select Granular, No. MN/RC-2005-32, 2006. Davich, P., F. Camargo, B. Larsen, R. Roberson, and J. Siekmeier, Validation of DCP and LWD Moisture Specifications for Granular Materials, Report No. MN/ RC-2006-20, Minnesota Department of Transportation, St. Paul., 2006. De Beer, M., Use of Dynamic Cone Penetrometer (DCP) in the Design of Road Structures. Geotechnics in African Environment, Rotterdam, the Netherlands, 1990. Deng-Fong, L., L. Chi-Chau, and L. Jyh-Dong, “Factors Affecting Portable Falling Weight Deflectometer Measure- ments,” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 132, No. 6, 2006, pp. 804–808. Durham, G., “Using TDR Technology for Earthwork Compac- tion Quality Control,” Presentation to the California Geo- technical Engineers Association, Jan. 15, 2005 [Online]. Available: http://www.durhamgeo.com/pdf/m_test-pdf/ paper/CGEA%20CA%20Jan%202005.pdf [accessed Mar. 2013]. Edil, T. and C. Benson, Investigation of the DCP and SSG as Alternative Methods to Determine Subgrade Stability, SPR No. 0092-01-05, University of Wisconsin–Madison, 2005. Egorov, K.E., “Calculation of Bed for Foundation with Ring Footing,” Proceedings 6th International Conference of Soil Mechanics and Foundation Engineering, Vol. 2, 1965, pp. 41–45. Ellis, R. and D. Bloomquist, Development of Compaction Quality Control Guidelines that Account for Variability in Pavement Embankments in Florida, Department of Civil and Coastal Engineering, University of Florida, Gainesville, 2003. Erchul, R.A. and R.B. Meade, Using an Impact Hammer to Evaluate Compaction, Chesterfield County, Va., 1994. Fairbrother, S., R. McGregor, and I. Aleksandrov, Development of a Correlation Equation between Clegg Impact Values and California Bearing Ratio for In-Field Strength Assessment of Forest Road Subgrades, 2010.

117 Farrag, K., D. Vetter, B. Hill, and R. Esposito, Evaluation of Soil Compaction Measuring Devices, Final Report, No. GRI-04/0067, Gas Research Institute, Des Plaines, Ill., 2005. Felt, E.J., Laboratory Methods of Compacting Granular Materials, ASTM STP 239, American Society of Testing Materials, West Conshohocken, Pa., 1958. Fiedler, S., C. Nelson, E.F. Berkman, and A. DiMillio, “Soil Stiffness Gauge for Soil Compaction Control,” Public Roads, FHWA, Vol. 61, No. 5, 1998, pp. 5–10. Fleming, P.R., “Small-scale Dynamic Devices for the Mea- surement of Elastic Stiffness Modulus on Pavement Foun- dations,” ASTM Special Technical Publication 1375, 2000, pp. 41–58. Fleming, P.R., “Field Measurement of Stiffness Modulus for Pavement Foundations,” 79th Annual Meeting of the Transportation Research Board, Washington, D. C., 2001. Fleming, P.R., M.W. Frost, and J.P. Lambert, “Review of the Lightweight Deflectometer for Routine In situ Assessment of Pavement Material Stiffness,” Transportation Research Record: Journal of the Transportation Research Board, No. 2004, Transportation Research Board of the National Academies, Washington, D.C., 2007, pp. 80–87. Fleming, P.R., C.D.F. Rogers, and M.W. Frost, “Performance Parameters and Target Values for Construction of UK Road Foundations,” Proceedings of the Fifth International Conference on Bearing Capacity of Roads and Airfields, Vol. 3, Trondheim, Norway, 1988. Forssblad, L., Vibratory Soil and Rock Fill Compaction, Monograph, 1981. Gamache, R.W., E. Kianirad, S. Pluta, S.R. Jersey, and A.N. Alshawabkeh, “A Rapid Field Soil Characterization Sys- tem for Construction Control,” TRB 88th Annual Meeting Compendium of Papers, Transportation Research Board of the National Academies, Washington, D.C., 2009, 12 pp. George, K.P. and W. Uddin, Subgrade Characterization for Highway Design, University of Mississippi, in coopera- tion with the Mississippi Department of Transportation, U.S. Department of Transportation, and Federal Highway Administration, Jackson, Miss., 2000. George, K.P., Soil Stabilization Trial, FHWA/MS-DOT- RD-01-133, Interim Report, MS 38677, Department of Civil Engineering, University of Mississippi, Oxford, 2001. George, K.P., Portable FWD (PRIMA 100) for In situ Subgrade Evaluation, Report No. FHWA/MS-DOT-RD-06-179, Uni- versity of Mississippi, Oxford, 2006. Gregg, L.E. and K.B. Woods, Highway Engineering Handbook, Sec. 14, McGraw-Hill Book Co., New York, N.Y., 1960. Gulen, S. and R.S. McDaniel, Use of Clegg Hammer for Com- paction Control, Final Report No. FHWA/IN/RD-90/2, Indiana Department of Transportation, Indianapolis, 1990. Gurtug, Y. and A. Sridharan, “Prediction of Compaction Characteristics of Fine-Grained Soils,” Geotechnique, Vol. 52, No. 10, 2002, pp. 761–763. Hansen, B. and J. Nieber, Performance Based Measurement of Optimum Moisture for Soil Compaction, Minnesota Department of Transportation, St. Paul, 2013. Harrison, I.R., “Correlation Between California Bearing Ratio and Dynamic Cone Penetrometer Strength Measure- ment of Soils,” Proceedings of the Institute of Civil Engi- neers, Part 2, Vol. 83, Technical Note No. 463, 1989. Hoffmann, O., B. Guzina, and A. Drescher, Enhancements and Verification Tests for Portable Deflectometers, Final Report No. MN/RC–2003-10, Minnesota Department of Transportation, St. Paul, 2003. Holtz, R., W. Kovacs, and T. Sheaha. An Introduction to Geotechnical Engineering, 2nd ed. Prentice Hall, Upper Saddle River, N.J., 2010. Hossain, M.S. and A.K. Apeagyei, Evaluation of the Light- weight Deflectometer for In situ Determination of Pavement Layer Moduli, Final Report FHWA/VTRC 10-R6, Virginia Transportation Research Council, Richmond, 2010. Hryciw, R.D. and T.G. Thomann, “Stress-History-Based Model for Cohesionless Soils,” Journal of Geotechnical Engineering, ASCE, Vol. 119, No. 7, 1993, pp. 1073–1093. Illinois Department of Transportation (ILDOT), Standard Specifications for Construction, ILDOT, Peoria, 2012. Indiana Department of Transportation (INDOT), Standard Specifications for Construction, INDOT, Indianapolis, 2013. International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE), Geotechnics for Pavements in Transportation Infrastructure, Roller-integrated Continu- ous Compaction Control (CCC), Technical Contractual Provisions—Recommendations, ISSMGE, London, U.K., 2005. Jackson, H., “Assessment of the Moisture Density Indicator for the Construction Quality Control of Compacted Dense Graded Aggregate Base Layers,” 2007 [Online]. Available: http://www.humboldtmfg.com/pdf/edg/RutgersU-reprt- MDI_Nuclear_Gauge%20Comparison.pdf. Jayawickrama, P., A. Amarasiri, and P. Regino, “Use of Dynamic Cone Penetrometer to Control Compaction of Granular Fill,” Transportation Research Record 1736, Transportation Research Board, National Research Coun- cil, Washington, D.C., 2000, pp. 71–80. Jean-Louis, M., and C. Gabriel, Trident Moisture Meter: A Study on Linear Soil Model Generation and the Effect of Soil Compaction on the Models, Department Of Civil Engi- neering, University of Kentucky, Lexington, 2010. Jersey, S.R. and L. Edwards, “Stiffness-Based Assessment of Pavement Foundation Materials Using Portable Tools,” Transportation Research Record: Journal of the Transpor- tation Research Board, No. 2016, Transportation Research Board of the National Academies, Washington, D.C., 2009, pp. 26–34. Joh, S.-H., T.H. Kang, S.A. Kwon, and M.C. Won, “Acceler- ated Stiffness Profiling of Aggregate Bases and Subgrades for Quality Assessment of Field Compaction,” Transportation Research Record: Journal of the Transportation Research Board, No. 1975, Transportation Research Board of the National Academies, Washington, D.C., 2006, pp. 63–72. Juran, I. and A. Rousset, “A Soil Compaction Control Tech- nology Assessment and Demonstration,” Proceedings of the APWA International Public Works Congress an Exhi- bition, Denver, Colo., Sep. 19–22, 1999. Kamiura, M., E. Sekine, N. Abe, and T. Meruyama, “Stiff- ness Evaluation of the Subgrade and Granular Aggregate

118 Using the Portable FWD,” Proceedings of the Fifth Inter- national Conference on Unbound Aggregate in Roads, Nottingham, United Kingdom, 2000. Kim, H., M. Prezzi, and R. Salgado, Use of Dynamic Cone Penetration and Clegg Hammer Tests for Quality Control of Roadway Compaction and Construction, Indiana Depart- ment of Transportation, 2010. Kim, W. and J. Labuz, Resilient Modulus and Strength of Base Course with Recycled Bituminous Material, Final Report submitted to Minnesota Department of Transportation, Uni- versity of Minnesota, St. Paul., 2006. Kleyn, E., Successful G1 Crushed Stone Basecourse Con- struction, SATC 2012, 2012. Kleyn, E.G., The Use of the Dynamic Cone Penetrometer (DCP), Report 2/74, Transvaal Roads Department, Preto- ria, South Africa, 1975. Konard, J.-M. and D. Lachance, “Mechanical Properties of Unbound Aggregates from DCP and Plate Load Tests,” Pro- ceedings of the Fifth International Conference on Unbound Aggregate in Roads, Nottingham, United Kingdom, 2000. Lambe, T.W., “Closure of Capillary Phenomena in Cohesion- less Soils,” Transactions of the American Society of Civil Engineers, Vol. 116, No. 1, 1951. Larsen, B.W., D.J. White, and C.T. Jahren, “Pilot Project to Evaluate Dynamic Cone Penetration QA/QC Specifica- tion for Non-Granular Soil Embankment Construction,” Transportation Research Record: Journal of the Transpor- tation Research Board, No. 2081, Transportation Research Board of the National Academies, Washington, D.C., 2008, pp. 92–100. Lenke, L.R., R.G. McKeen, and M. Grush, “Laboratory Evaluation of the GeoGauge for Compaction Control,” Transportation Research Record: Journal of the Transpor- tation Research Board, No. 1849, Transportation Research Board of the National Academies, Washington, D.C., 2003, pp. 20–30. Lewis, W.A., “Recent Research into the Compaction of Soil by Vibratory Compaction Equipment,” Proceedings of the 5th International Conference of Soil Mechanics and Founda- tion Engineering, Paris, France, Vol. 2, 1961, pp. 261–268. Li, Y., Use of a BCD for Compaction Control, Ph.D. disserta- tion, Texas A&M University, College Station, 2004. Lin, D., C. Liau, and J. Lin, “Factors Affecting Portable Fall- ing Weight Deflectometer Measurements,” Journal of Geo- technology and Geoenvironmental Engineering, ASCE, Vol. 132, No. 6, 2006, pp. 804–808. Livneh, M. and I. Ishai, “Pavement and Material Evaluation by a Dynamic Cone Penetrometer,” Proceedings, Sixth Inter- national Conference on the Structural Design of Asphalt Pavement, Vol. 1, Ann Arbor, Mich., 1987, pp. 665–674. Livneh, M., I. Ishai, and N.A. Livneh, “Effect of Vertical Con- finement on Dynamic Cone Penetrometer Strength Values in Pavement and Subgrade Evaluations,” Transportation Research Record 1473, Transportation Research Board, National Research Council, Washington, D.C., 1995, pp. 1–8. Maher, A., T. Bennert, and N. Gucunski, Evaluation of the Humboldt Stiffness Gauge, No. FHWA-NJ-2002-002, 2002. Marek, C.R. and T.R. Jones, Jr., “Compaction—An Essential Ingredient for Good Base 12 Performance,” Proceedings from Conference on Utilization of Graded Aggregate Base in 13 Flexible Pavements, Oak Brook, Ill., 1974, Mar. 25–26. Mathur, T.S. and G.T. Coghlan, “The Use of the Clegg Impact Tester in Managing and Designing Aggregate-Surfaced Roads,” Transportation Research Record 1106, Transpor- tation Research Board of the National Academies, Wash- ington, D.C., 1987, pp. 232–236. McRae, J.L., Gyratory Testing Machine Technical Manual for Bituminous Mixtures, Soils, and Base Course Mate- rials, Engineering Developments Company, Inc., Vicks- burg, Miss., 1965. Miller, H. and R. Mallick, Field Evaluation of a New Com- paction Monitoring Device, prepared for the New England Transportation Consortium, 2003. Minnesota Department of Transportation, Office of Materi- als, 1400 Gervais Avenue, MS 645, Maplewood. Minnesota Department of Transportation (Mn/DOT), Stan- dard Specifications for Construction, St. Paul, 2012. Mohammad, L., M. Nazzal, M. Abu-Farsakh, and K. Alshibli, “Estimation of Subgrade Soils Resilient Modulus from in Situ Devices Test Results,” Journal of Testing and Evalu- ation, ASTM, Vol. 37, No. 3, 2009, pp. 245–253. Mooney, M.A., C.S. Nocks, K.L. Selden, G.T. Bee, and C.T. Senseney, Improving Quality Assurance of MSE Wall and Bridge Approach Earthwork Compaction, DTD Applied Research and Innovation Branch, Colorado Department of Transportation, Denver, 2003. Mooney, M.A. and P.K. Miller, “Analysis of Light Falling Weight Deflectometer Test Based on In situ Stress and Strain Response,” Journal of Geotechnology and Geoenvironmen- tal Engineering, ASCE, Vol. 134, No. 10, 2009. Mooney, M.A., R.V. Rinehart, N.W. Facas, O.M. Musimbi, D.J. White, and P.K.R. Vennapusa, NCHRP Report 676: Intel- ligent Soil Compaction Systems, Transportation Research Board of the National Academies, Washington, D.C., 2011. National Cooperative Highway Research Program (NCHRP), Intelligent Soil Compaction Systems—NCHRP Project 21-09, Transportation Research Board of the National Academies, Washington, D.C., 2009. National Cooperative Highway Research Program (NCHRP), Modulus-Based Construction Specification for Compac- tion of Earthwork and Unbound Aggregates—NCHRP Proj- ect 10-84, Transportation Research Board of the National Academies, Washington, D.C., 2011. Nazzal, M.D., Field Evaluation of In situ Test Technology QC/ QA During Construction of Pavement Layers and Embank- ments: Louisiana, Louisiana State University, Baton Rouge, 2003. Nazzal, M., M. Abu-Farsakh, E. Alshibli, and L. Mohammad, “Evaluating Light Falling-Weight Deflectometer Device for in Situ Measurement of Elastic Modulus of Pavement Layers,” Transportation Research Record: Journal of the Transportation Research Board, No. 2016, Transportation Research Board of the National Academies, Washington, D.C., 2007, pp. 13–22.

119 Nazarian, S., L. Mohammad, M. Abu-Farsakh, A. Puppala, and R. Bulut, Modulus-Based Construction Specification for Compaction of Earthwork and Unbound Aggregate, Phase 1 Report for NCHRP Project 10-84, National Coop- erative Research Program, 2012. Oman, M., Advancement of Grading and Base Material Testing, Office of Materials, Minnesota Department of Transportation, St. Paul, 2004, 30 pp. Omar, M., A. Shanableh, A. Basma, and S. Barakat, “Com- paction Characteristics of Granular Soils in United Arab Emirates,” Geotechnical & Geological Engineering, Vol. 21, No. 3, 2003, pp. 283–295. Ooi, P.S., A.R. Archilla, Y. Song, and M.L.Q. Sagario, Appli- cation of Recycled Materials in Highway Projects, Final Report: HWY-L-2005-04, Hawaii Department of Trans- portation, Honolulu, 2010. Parker, F., M. Hammons, and J. Hall, Development of an Auto- mated Dynamic Cone Penetrometer for Evaluating Soils and Pavement Materials, Final Report WPI# 0520751, Florida Department of Transportation, Tallahassee, 1998. Pen, C.K., “An Assessment of the Available Methods of Analysis for Estimating the Elastic Moduli of Road Pave- ments,” Proceedings of the Third International Conference on Bearing Capacity of Roads and Airfields, Trondheim, Norway, July 3–5, 1990. Petersen, L. and R. Peterson, Intelligent Compaction and In situ Testing at Mn/DOT TH53, Final Report MN/ RC-2006-13, Minnesota Department of Transportation, St. Paul, 2006. Petersen, J., S. Romanoschi, and M. Hossain, Development of Stiffness-Base Specifications for In situ Embankment Compaction Quality Control, Final Report No. K-TRAN: KSU-04-6, Kansas Department of Transportation, Topeka, 2007. Peterson, A. and D. Wiser, “What Measures Backfill Com- paction Best?” Gas Utility Manager Magazine, Jan. 2003 [Online]. Available: http://www.gasindustries.com/articles/ jan03b.htm. Pettibone, H.C. and J. Hardin, Research on Vibratory Maximum Density Test for Cohesionless Soils, Compaction of Soils, ASTM Special Publication No. 377, West Conshohocken, Pa., 1964, pp. 3–19. Pidwerbesky, B., “Evaluation of Non-destructive in Situ Tests for Unbound Granular Pavements,” Transactions of the Institution of Professional Engineers New Zealand: Civil Engineering Section, Vol. 24, No. 1, 1997, p. 12. Ping, W.V., G. Xing, M. Leonard, and Z. Yang, Evaluation of Laboratory Compaction Techniques for Simulating Field Soil Compaction (Phase II), Report No. FL/DOT/RMC/ BB-890 (F), Florida Department of Transportation, Talla- hassee, 2003. Porter, O.J., Method of Determining Relative Compaction and Shrinkage of Soil Materials, Research Department, Califor- nia Division of Highways, Sacramento, 1930. Proctor, R.R., “Fundamental Principles of Soil Compaction,” Engineering News-Record, Vol. 111, Nos. 9, 10, 12, and 13, 1933. Proctor, R.R., “Laboratory Soil Compaction Methods, Pen- etration Resistance Measurements and the Indicated Satu- rated Penetration Resistance,” Engineering News-Record, Vol. 123, No. 110, 1945. Proctor, R.R., “Relationship Between the Foot Pounds Per Cubic Foot of Compactive Effort and Subsequent Con- solidation Under Various Loadings,” Proceedings of the 2nd International Conference on Soil Mechanics and Foun- dation Engineering, Vol. 5, Rotterdam, the Netherlands, 1948. Pu, J., Use of Stiffness for Evaluating Compactness of Cohesive Geomaterials, Doctoral dissertation, University of Hawaii at Manoa, Honolulu, 2002. Rathje, E.M., S.G. Wright, K.H. Stokoe II, A. Adams, R. Tobin, and M. Salem, Evaluation of Non-nuclear Methods for Compaction Control, FHWA/TX-06/0-4835-1, Texas Department of Transportation, College Station, 2006. Roadscanners [Online]. Available: http://www.schmidtgen- engineering.de/2009_roadscanners/broschueren_englisch/ Percometerbrochure_42008.pdf, 2006. Rodriguez, A.R., H.D. Castillo, and G.F. Sowers, Soil Mechan- ics in Highway Engineering, Germany, 1988, pp. 448–451. Runkles, B., N. White, and A. Ashmawy, Calibration and Accu- racy Assessment of the TDR One-Step Method for Quality Control of Compacted Soils, Report No. BD-544-19, Florida Department of Transportation, Tallahassee, 2006. Salgado, R. and S. Yoon, Dynamic Cone Penetration Test (DCPT) for Subgrade Assessment, Joint Transportation Research Program, Project No. C-36-45S, Purdue Univer- sity, West Lafayette, Ind., 2003. Sallam, A.M., N.K. White, and A.K. Ashmawy, Evaluation of the Purdue TDR Method for Soil Water Content and Den- sity Measurement, Final Report–Contract No. BC-353-30, Florida Department of Transportation, Tallahassee, 2004. Sawangsuriya, A., P.J. Bosscher, and T.B. Edil, “Laboratory Evaluation of the Soil Stiffness Gauge,” Transportation Research Record: Journal of the Transportation Research Board, Vol. 1808, No. 1, 2002, pp. 30–37. Scott, S., III, L. Konrath, and T. Ferragut, Performance Speci- fications for Rapid Highway Renewal, Strategic Highway Research Program 2 Report, Transportation Research Board of the National Academies, Washington, D.C., 2013, 480 pp. Sebesta, S., J. Oh, J. Sang Ick Lee, M. Sanchez, and R. Taylor, Initial Review of Rapid Moisture Measurement for Road- way Base and Subgrade, Texas Department of Transporta- tion Report No. 0-6676-1, 2013. Sebesta, S., C. Estakhri, T. Scullion, and W. Liu, New Tech- nologies for Evaluating Flexible Pavement Construction: Year 1 Report, Report No. FHWA/TX-06/0-4774-1, Texas Department of Transportation, College Station, 2006. Shongtao, D. and C. Kremer, Improvement and Validation of MnDOT DCP Specifications for Aggregate Base Materi- als and Select Granular, Office of Materials and Road Research, Minnesota Department of Transportation Maple- wood, Minnesota 2006. Siddiki, N.Z., A. Khan, D. Kim, and T. Cole, “Use of In Situ Tests in Compaction Control of a Bottom Ash Embank-

120 ment,” Transportation Research Record: Journal of the Transportation Research Board, No. 2045, Transportation Research Board of the National Academies, Washington, D.C., 2008. Siekmeier, J.A., D. Young, and D. Beberg, Comparison of the Dynamic Cone Penetrometer with Other Tests During Subgrade and Granular Base Characterization in Min- nesota, ASTM Special Technical Publication 1375, 2000, pp. 175–188. Siekmeier, J., C. Pinta, S. Merth, J. Jensen, P. Davich, F. Camargo, and M. Beyer, Using the Dynamic Cone Pene- trometer and the Light Weight Deflectometer for Construc- tion Quality Assurance, Final Report MN/RC 2009-12, Minnesota Department of Transportation, St. Paul, 2009. Simmons, C., Letter of Finding: Memorandum to the Mis- souri Department of Transportation Research, Develop- ment and Technology Division, July 25, 2000. Sivrikaya, O., “Models of compacted fine-grained soils used as mineral liner for solid waste,” Environmental Geology, Vol. 53, No. 7, 2008, pp. 1585–1595. Sivrikaya, O., E. Togrol, and C. Kayadelen, “Estimating Compaction Behaviour of Fine-grained Soils Based on Compaction Energy,” Canadian Geotechnical Journal, Vol. 45, 2008, pp. 877–887. Smith, D.M., Response of Granular Layers in Flexible Pavements Subjected to Aircraft Loads, PhD Dissertation, Louisiana State University, Baton Rouge, 2000. Smith, R.B. and D.N. Pratt, “A Field Study of In situ Califor- nia Bearing Ratio and Dynamic Penetrometer Testing for Road Subgrade Investigation,” Australian Road Research, Vol. 13, No. 4, 1983, pp. 285–294. Sridharan, A. and H.B. Nagaraj, “Plastic Limit and Com- paction Characteristics of Fine-grained Soils,” Ground Improvement, Vol. 9, No. 1, 2005, pp. 17–22. Stanton, T.E., “Highway Fill Studies and Soil Stabilization,” California Highways and Public Works, Vol. 16, 1928. Steinart, B.C., D.N. Humphrey, and M.A. Kestler, Portable Falling Weight Deflectometer Study, New England Trans- portation Consortium Project No. 00-4, University of Maine, Bangor, 2005, 331 pp. Thurner, H. and A. Sandström, “Quality Assurance in Soil Compaction,” Proceedings of XII IRF World Congress, Madrid, Spain, 1980, pp. 951–955. Thompson, M. and D. White, “Estimating Compaction of Cohesive Soils from Machine Drive Power,” Journal of Geotechnology and Geoenvironmental Engineering, ASCE, Vol. 134, No. 12, 2008, pp. 1771–1777. TransTech Systems, Inc., Development of a Non-Nuclear Soil Density Gauge to Eliminate the Need for Nuclear Density Gauges, Final Project Report, U.S. Department of Home- land Security, Washington, D.C. 2008. Troxler [Online]. Available: http://www.concrete-catalog.com/ images/nuclear_test.gif, 2002. Tutumluer, E., NCHRP Synthesis 445: Practices for Unbound Aggregate Pavement Layers, Transportation Research Board of the National Academies, Washington, D.C., 2013, 180 pp. Von Quintus, H.L., et al., NCHRP Report 626: NDT Technol- ogy for Quality Assurance of HMA Pavement Construction, Transportation Research Board of the National Academies, Washington, D.C., 2009, 120 pp. Webster, S.L., R.H. Grau, and T.P. Williams, Description and Application of Dual Mass Dynamic Cone Penetrom- eter, No. WES/IR/GL-92-3, Geotechnical Lab., Army Engineer Waterways Experiment Station, Vicksburg, Miss.,1992. Weidinger, D.M. and L. Ge, “Laboratory Evaluation of the Briaud Compaction Device,” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 135, No. 10, 2009, pp. 1543–1546. Wermers, L.G., Evaluation of Abbreviated Methods for Rou- tine Soil Testing, FHWA/IN/JHRP-63/17, Joint Highway Research Project, Indiana Department of Transportation and Purdue University, West Lafayette, Ind., 1963. Whaley, A.M., Non-Destructive Pavement Testing Equip- ment: Loadman, Falling Weight Deflectometer, Benkelman Beam, Clegg Hammer, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand, 1994, 19 pp. White, D.J., M. Thompson, and P. Vennapusa, “Field Valida- tion of Intelligent Compaction Monitoring Technology for Unbound Materials,” Partnership, Iowa State University, Ames, Vol. 515, 2007a, 12 pp. White, D.J., M. Thompson, and P. Vennapusa, Field Study of Compaction Monitoring Systems: Self-Propelled Non- Vibratory 825G and Vibratory Smooth Drum CS-533 E Rollers, Final Report, Center of Transportation Research and Education, Iowa State University, Ames, 2007b. White, D.J., P. Vennapusa, H. Gieselman, L. Johanson, and J. Siekmeier, “Alternative to Heavy Test Rolling for Cohe- sive Subgrade Assessment,” Eighth International Confer- ence on the Bearing Capacity of Roads, Railways, and Air- fields (BCR2A’09), June 29–July 2, Champaign, Ill., 2009a. White, D.J., P. Vennapusa, J. Zhang, H. Gieselman, and M. Morris, Implementation of Intelligent Compaction Perfor- mance Based Specifications in Minnesota, EERC Publica- tion ER09-03, MN/RC 2009-14, Minnesota Department of Transportation, St. Paul, Mar. 2009b. Winter, M.G. and B.G. Clarke, “Methods for Determining Representative Density-Depth Profiles Using Nuclear Density Gauges,” Geotechnique, Vol. 52, No. 7, 2002, pp. 519–526. Woods, K.B. and R.R. Litehiser, “Soil Mechanics Applied to Highway Engineering in Ohio,” Bulletin 99, Ohio Univer- sity Experiment Station, 1938. Yu, X. and V.P. Drnevich, “Soil Water Content and Dry Den- sity by Time Domain Reflectometry,” Journal of Geotech- nical and Geoenvironmental Engineering, Vol. 130, No. 9, 2004, pp. 922–934. Zhang, Z.J., Y.M. Abu-Farsakh, and L. Wang, Evaluation of Trench Backfill at Highway Cross-Drain Pipes, 83rd Annual Meeting of the Transportation Research Board Annual Meeting, Washington, D.C., 2004. Zhang, Z., M. Tao, and M. Tumay, “Absorbed Energy and Compacted Cohesive Soil Performance—Technical Note,” Geotechnical Testing Journal, Vol. 28, No. 4, ASTM, 2005, pp. 404–409.