Measuring, Characterizing, and Reporting Pavement Roughness of Low-Speed and Urban Roads (2019)

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

76 21st Century Infrastructure Commission Report. Nov. 30, 2016. Burchett, J. L., R. L. Rizenbergs, and T. A. Moore. 1977. Surface Dynam- ics Profilometer and Quarter-Car Simulator: Description, Evalua- tion, and Adaptation. Research Report No. 465, Kentucky Bureau of Highways, Lexington, KY. Cantisani, G. and G. Loprencipe. 2010. Road Roughness and Whole Body Vibration Evaluation Tools and Comfort Limits. Journal of Transportation Engineering, ASCE, Vol. 136, No. 9, pp. 818–826. Chalasani, R. M. 1986. Ride Performance Potential of Active Suspen- sions Systems—Part I: Simplified Analysis Based on a Quarter- Car Model. Proceedings: Symposium on Simulation and Control of Ground Vehicles and Transportation Systems. Anaheim, CA. Dahlberg, T. 1979. An Optimized Speed-Controlled Suspension of a 2-DOF Vehicle Traveling on a Randomly Profiled Road. Journal of Sound and Vibration, Vol. 62, No. 4, pp. 541–546. Eck, R. W. and S. K. Kang. 1991. Low-Clearance Vehicles at Railway- Grade Crossings: An Overview of the Problem and Potential Solu- tions. Transportation Research Record: The Journal of the Transpor- tation Research Board, No. 1327. Transportation Research Board, National Research Council, Washington, D.C., pp. 27–35. Gagarin, N., J. Mekemson, S. Chintakunta, and R. Orthmeyer. 2011. Development of Operational Constraints of Road Profiling Equip- ment Based on a Single-Axis Accelerometer. Task Order 15, FHWA Contract DTFH61-06-D-00021. Gillespie, T. D., M. W. Sayers, and L. Segel. 1980. NCHRP Report 228: Calibration of Response-Type Road Roughness Measuring Systems. Transportation Research Board, National Research Council, Wash- ington, D.C. Gillespie, T. D. 1992. Everything You Always Wanted to Know About the IRI, But Were Afraid to Ask! Road Profiler Users Group Meeting, Lincoln, NE, September 22–24. Green, E.R., C. Blackden, and M.A. Fields. 2015. Spatial Database for Intersections. Report KTC-15-11/SPR14-480-1F, Kentucky Trans- portation Cabinet, Lexington, KY. Griffin, M. J. 1986. Evaluation of Vibration with Respect to Human Response. SAE Technical Paper 860047. Hrovat, D. 1988. Influence of Unsprung Weight on Vehicle Ride Quality. Journal of Sound and Vibration, Vol. 124, No. 3, pp. 497–516. Hu, Y.-C., T.-L. Wu, C. E. Lee, and R. Machemehl. 1979. Roughness at the Pavement–Bridge Interface. Research Report Number 213-1F, Center for Highway Research, The University of Texas at Austin. Huft, D. L. 1984. South Dakota Profilometer. Transportation Research Record: The Journal of the Transportation Research Board, No. 1000. Transportation Research Board, National Research Council, Washington, D.C., pp. 1–8. Janoff, M. S., J. B. Nick, P. S. Davitt, and G. F. Hayhoe. 1985. NCHRP Report 275: Pavement Roughness and Rideability. Transportation Research Board, National Research Council, Washington, D.C. Janoff, M. S. 1988. NCHRP Report 308: Pavement Roughness and Ride- ability Field Evaluation. Transportation Research Board, National Research Council, Washington, D.C. Karamihas, S. M., T. D. Gillespie, R. W. Perera, and S.D. Kohn. 1999. NCHRP Report 434: Guidelines for Longitudinal Pavement Profile Measurement. Transportation Research Board, National Research Council, Washington, D.C. Karamihas, S. M. 2005. Critical Profiler Accuracy Requirements. Report UMTRI-2005-24, University of Michigan Transportation Research Institute, Ann Arbor, MI. Karamihas, S. M. 2007. Profile Analysis of the LTPP SPS-1 Site in Arizona. Report UMTRI-2007-16, University of Michigan Transportation Research Institute, Ann Arbor, MI. Karamihas, S. M. and K. Senn. 2009. Profile Analysis of Arizona Specific Pavement Studies 5 Project. Transportation Research Record: The Journal of the Transportation Research Board, No. 2095. Transporta- tion Research Board, National Research Council, Washington, D.C., pp. 144–152. Karamihas, S. M. and K. Senn. 2010. Profile Analysis of the LTPP SPS-6 Site in Arizona. Report UMTRI-2010-17, University of Michigan Transportation Research Institute, Ann Arbor, MI. Karamihas, S. M. 2012. Simulation Speed and Its Implications to the Relevance of the IRI. American Society for Testing and Materials STP 1555, pp. 248–266. La Torre, F., L. Ballerini, and N. Di Volo. 2002. Transportation Research Record: The Journal of the Transportation Research Board, No. 1806. Transportation Research Board, National Research Council, Washington, D.C., pp. 131–139. McGhee, K. K. 2002. Smoothness Provision for Bridge Decks. Transpor- tation Research Record: The Journal of the Transportation Research Board, No. 1813. Transportation Research Board, National Research Council, Washington, D.C., pp. 210–217. Movassaghi, K. K., J. Lee, and A. Kumat. 1993. Roughness Analysis at Grade Breaks at Intersections. Publication FHWA/LA-93/257, Louisiana Transportation Research Center, Baton Rouge, LA. Múcka, P. 2017. Road Roughness Limit Values Based on Measured Vehicle Vibration. Journal of Infrastructure Systems, ASCE, Vol. 23, No. 2. Ogden, B. D. 2007. Railroad–Highway Grade Crossing Handbook— Revised Second Edition 2007. Publication FHWA-SD-07-010, Office References

77 of Safety Design, FHWA, U.S. Department of Transportation, Washington, D.C. Ohio Department of Transportation. 2012. Surface Smoothness for Bridges and Approaches Proposal Note 555. Perera, R. and S. Kohn. 2004. Effects of Variation in Quarter-Car Simulation Speed on International Roughness Index. Transporta- tion Research Record: The Journal of the Transportation Research Board, No. 1889. Transportation Research Board, National Research Council, Washington, D.C., pp. 144–151. Perera, R. W. and S. M. Karamihas. 2014. Study for Establishing Regional Certification Centers for Inertial Profilers. Final Report, FHWA, U.S. Department of Transportation, Washington, D.C. Poister, T. H., P. M. Garvey, and C. L. Smith. 2003. Road Quality from the Motorist’s Perspective. Final Report. Pennsylvania Department of Transportation. Reggin, A., A. Shalaby, R. Emanuels, and G. St. Michel. 2008. Urban Considerations for Using Road Roughness To Manage Road Networks. 7th International Conference on Managing Pavement Assets, Calgary, Alberta. Rose, J. G., T. W. Witt, A. F. Renfro, and N. E. Ridgeway. 2009. Highway– Railway At-Grade Crossings: Rideability Measurements and Assess- ments. Report KTC-09-07/FR 136-04-4F, Kentucky Transportation Cabinet, Frankfort, KY. Sayers, M. W. and T. D. Gillespie. 1986. The Ann Arbor Road Profilom- eter Meeting. Publication FHWA/RD-86/100, FHWA, U.S. Depart- ment of Transportation, Washington, D.C. Sayers, M. W. 1986. Characteristic Power Spectral Density Functions for Vertical and Roll Components of Road Roughness. Proceed- ings: Symposium on Simulation and Control of Ground Vehicles and Transportation Systems. Anaheim, CA. Segel, L., J. Y. Wong, E. H. Law, and D. Hrovat, eds. American Society of Mechanical Engineers, AMD-Vol. 80, DSC-Vol. 2. Sayers, M. W., T. D. Gillespie, and W. D. O. Patterson. 1986. Guidelines for Conducting and Calibrating Road Roughness Measurements. Technical Paper Number 46, The World Bank, Washington, D.C. Sayers, M. W. 1990. Profiles of Roughness. Transportation Research Record: The Journal of the Transportation Research Board, No. 1260. Transportation Research Board, National Research Council, Washington, D.C., pp. 106–111. Sayers, M. W. 1995. On the Calculation of International Roughness Index from Longitudinal Road Profile. Transportation Research Record: The Journal of the Transportation Research Board, No. 1501. Transportation Research Board, National Research Council, Washington, D.C., pp. 1–12. Sayers, M. W. and S. M. Karamihas. 1996a. Interpretation of Road Roughness Profile Data. Report UMTRI-96-19, University of Michigan Transportation Research Institute, Ann Arbor, MI. Sayers, M. W. and S. M. Karamihas. 1996b. Estimation of Rideability by Analyzing Longitudinal Road Profile. Transportation Research Record: The Journal of the Transportation Research Board, No. 1536. Transportation Research Board, National Research Council, Washington, D.C., pp. 110–116. Sayers, M. W. and S. M. Karamihas. 1998. The Little Book of Profiling. University of Michigan Transportation Research Institute, Ann Arbor, MI. Schaefer, V., M. Suleiman, D. White, C. Swan, and K. Jensen. 2005. IHRP Project TR-503, Iowa Highway Research Board, Iowa State University, Ames, IA. Shafizadeh, K., F. Mannering, and L. Pierce. 2002. A Statistical Analy- sis of Factors Associated with Driver-Perceived Road Roughness on Urban Highways. Report WA-RD 538.1, Washington State Depart- ment of Transportation, Olympia, WA. Schuring, D. J., K. D. Bird, and J. F. Martin. 1974. Power Requirements of Tires and Fuel Economy, Tire Science and Technology, TSTCA, Vol. 2, No. 4, pp. 261–285. Sobanjo, J. O. 2006. Design Guidelines for Highway Railroad Crossing Profiles in Florida. Florida State University, Tallahassee, FL. Starodub, Inc. 2003. Effect of Accelerometer Sensitivity on Inertial Pro- file Measurements for Proposed Certification Procedure. Task Order SEQS-21, FHWA Contract no. DTFH61-00-C-00076. Still, P. B. and P. G. Jordan. 1980. Evaluation of the TRRL High-Speed Profilometer. Report 922, Transport and Road Research Laboratory, Crawthorne, Berkshire. Swan, M. and S. M. Karamihas. 2003. Use of a Ride Quality Index for Construction Quality Control and Acceptance Specifications. Transportation Research Record: The Journal of the Transportation Research Board, No. 1861. Transportation Research Board, National Research Council, Washington, D.C., pp. 10–16. Walker, R. S. and E. Becker. 2006. Collecting Stop and Go Inertial Profile Measurements. Report FHWA/TX-06/0-4480-1, Texas Department of Transportation, Austin, TX. Wilde, W. J., C.A. Grant, and P. K. Nelson. 2002. Manual for Controlling and Reducing the Frequency of Pavement Utility Cuts. Office of Program Administration, FHWA, U.S. Department of Transporta- tion, Washington, D.C. Williams, T. A. 2003. Classification of Railroad Crossings in Indiana for Roughness. Publication FHWA/IN/JTRP-2003/04, Joint Transpor- tation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, IN. Wooldridge, M. D., D. B. Fambro, M. A. Brewer, R. J. Engelbrecht, S. R. Harry, and H. Cho. 2000. Design Guidelines for At-Grade Intersections near Highway-Railroad Grade Crossings. Publication FHWA/TX-01/1845-3, FHWA, U.S. Department of Transporta- tion, Texas Transportation Institute. Yu, J., E. Y. J. Chou, and J.-T. Yau. 2006. Development of Speed-Related Ride Quality Thresholds Using International Roughness Index. Transportation Research Record: The Journal of the Transportation Research Board, No. 1974. Transportation Research Board, National Research Council, Washington, D.C., pp. 47–53.